Er zijn nog geen producten in uw winkelwagen geplaatst.
NIEUW
Â
Bezig met laden...
SkyRC Battery Discharger and Analyzer 40A 380W
€ 129,95
Product information "SkyRC Battery Discharger and Analyzer 40A 380W"
The BD380 is a powerful discharger that allows you to comfortably discharge a battery with up to 40 amperes or 380 watts. But that's not all, as the discharger also offers the ability to measure battery performance during the process and even compare it with other batteries. Precisely measuring the capacity greatly assists in selecting the best battery for your next journey.
No matter what type of battery you want to discharge, factors and distinguishing features such as type, size, chemistry, and the number of cells don't matter. The BD380 can handle a wide variety of batteries up to 30 volts. Inside the robust housing with an XT60 connector for the battery, there is also an effective cooling system to ensure optimal operating temperature. The large color display shows values such as the battery voltage, discharged capacity, and discharge current, among others.
Features
No matter what type of battery you want to discharge, factors and distinguishing features such as type, size, chemistry, and the number of cells don't matter. The BD380 can handle a wide variety of batteries up to 30 volts. Inside the robust housing with an XT60 connector for the battery, there is also an effective cooling system to ensure optimal operating temperature. The large color display shows values such as the battery voltage, discharged capacity, and discharge current, among others.
Features
- 4 operating modes: CC (Constant Current), CR (Constant Resistance), CP (Constant Power), CV (Constant Voltage)
- Simple and innovative operation
- Effective cooling system
- Real-time display of battery voltage, discharged capacity, and discharge current
- Efficient testing of battery capacity for optimal battery selection for the next journey
- Controllable via integrated Bluetooth with the SkyCharger app for Android and iOS systems
- Detection of DC-stabilized power supply quality
| Operating Voltage: | 3,0 - 30,0V DC | |
| Discharge Voltage Range: | 5,9 - 30,0V (main port only) 3,0 - 30,0V (external power supply) |
|
| Low Voltage Alarm: | <3,0V | |
| High Voltage Alarm: | >max. 30,5V | |
| Discharge Power: | max. 380W | |
| Discharge Current: | 0,3 - 40,0A | |
| Operating Modes: | CC Constant Current | 0,3 - 40,0A |
| CR Constant Resistance | 1 - 100 Ohm | |
| CP Constant Power | 1 - 380W | |
| CV Constant Voltage (Note: Do not connect a battery in this mode) |
max. 180W power (Note: Set the max. current allowed for the current input voltage) |
|
| Connector: | XT60 | |
| Bluetooth Connection: | Yes (SkyCharger app) | |
| Language: | English, French, Spanish, German, Japanese, Chinese | |
| Dimensions: | 159,69 x 121,6 x 110mm | |
| Weight: | approx. 1100g | |
Hobbywing Xerun Bandit Brushless Motor G4 13.5T 3350kV
€ 124,95
Product information "Hobbywing Xerun Bandit Brushless Motor G4 13.5T 3350kV"
Those who are eager for high performance in 1/10 OBL competitions will make the right choice with the Xerun Bandit G4 motor series. This motor proves to be up to 18% more powerful and 12% more efficient compared to comparable G2R predecessors. With the fully adjustable timing ranging from 20 to 60 degrees, the full potential of the Bandit G4 is unleashed. The motor adopts a fully exposed stator core structure, meaning that the outer stator core is directly exposed to maximize heat dissipation performance.
Features:
- More power than the Xerun Bandit G2R series
- Dual sensor design for optimal wiring in RC car
- New motor housing with optimized cooling openings
- Adjustable timing from 20-60°
- High-precision manufactured rotor (5-13.9*24.1-AUS)
- High temperature tolerance of the winding
- Easily disassembled for maintenance
Technical Specifications:
| Winding: | 13.5T |
| Type: | Sensored Brushless |
| kV Rating: | 3400KV |
| Max. Power Output: | 368W |
| Max. Current: | 46A |
| No-Load Current: | 4.10A |
| LiPo Cells: | 2-3S |
| Poles: | 2 |
| Timing (adjustable): | 20-60° |
| Diameter: | 35.8mm |
| Length: | 53.9mm |
| Shaft Diameter: | 3.175mm |
| Shaft Length: | 14mm |
| Weight: | 187g |
| Application: | 1/10 OBL Stock, Outlaw Races |
Flysky FGr4D AFHDS3 Receiver 4CH
€ 54,95
Product information "Flysky FGr4D AFHDS3 Receiver 4CH"
The bidirectional FGr4D receiver is equipped with 4 channels and runs the AFHDS3 protocol. Thanks to the two built-in antennas and the compact design, there are numerous possible applications in the smallest of spaces. In addition to the four channels, the receiver also offers 5 functional interfaces that can be configured with different signal types such as i-BUS2, S.BUS, i-BUS and PPM. The FGr4D is also waterproof according to the PPX6 standard.
Technical Specifications
| PWM-Channels: | 4 |
| RF: | 2.4GHz |
| Protocol: | AFHDS 3 |
| Antennas: | Dual (internal) |
| Input Voltage: | 3.5-9V |
| Output: | PWM/PPM/i-BUS/S.BUS/i-BUS 2 |
| Temperature: | -10°C to +60°C |
| Max. Humidity: | 20%-95% |
| Update: | Yes, online |
| Dimensions: | 30.3x25.8x20mm |
| Weight: | 7.2g |
| Suitable for: | Cars, Boats |
| Compatible Transmitter: | all AFHDS3-Transmitter |
TAMIYA 54516 XV-01 Assy. Univ. Shaft R *2
€ 39,95
XV-01/T Halfcardan assen achter 39 mm (2)
De set bestaat uit een tuning aandrijfassen en wielassen.
De cardan minimaliseerd de wrijving van de aandrijfassen. (Onder andere meer snelheid)
Geschikt voor de volgende Tamiya chassis:
- XV-01 (58528)
- XV-01 Pro (58526)
- XV-01T (58552)
-TT-02R
-TT-02RR
Leveromvang:
- 2 stuks wielassen (9804648)
- 2 stuks 42mm aandrijfassen (53505)
- Kleine onderdelen voor de aandrijfassen (51444)
- Instructieblad
Houd er rekening mee dat deze set niet compatibel is met het XV-01 TC chassis
TAMIYA 53501 RC 42mm Swing Shaft
€ 25,95
Tamiya 53501 Aandrijfassen 42mm staal (2) TRF415
Swing Shafts 2St.
Passend voor de volgende Tamiya modellen:
- TB-02
- TB03- VDS - alleen achter
- TB-04R (84412)
- TRF414M2
- TRF415 (58320)
- TB Evo III
- TB Evo.6 Chassis (84379)
- TRF416 World Edition (42138) - alleen achter
- TRF416X (42162) - alleen achter
- XV-01 Pro (58526) - alleen voor
Power HD M8H 1:12 Pan Car Servo
€ 79,95
Power HD M8H 1:12 Pan Car Servo
De Power HD M8H is een topklasse servo die is geoptimaliseerd voor 1:12 racen.
De servo kan worden geïnstalleerd in alle panwagens die sleufgaten hebben voor de servomontage in het chassis.
De servo kan worden gebruikt met alle gangbare transmissiemodi (PGC, SSR, SUR, SXR, SR en SFR)
De M8H zorgt voor precieze besturing en nauwkeurige besturing in je 1:12 Pan Car.
Kenmerken:
- Aandrijfkracht (4,8V): 4,5 kg-cm
- Aandrijfkracht (6,0V): 6,3 kg-cm
- Bedieningskracht (7.4V): 7.5 kg-cm
- Bedieningskracht (8,4V): 8,5 kg-cm
- Snelheid: 0,11 sec (4,8V) │ 0,085 sec (6,0V)
- Snelheid: 0,073 sec (7,4V) │ 0,065 sec (8,4V)
- Bedrijfsspanning: 4,8 ~ 8,4 DC Volt
- Gewicht: 18 g
- Motortype：Cernloze motor
- Versnellingsbak：Alu
- Afmetingen：27,2 x 12,1 x 28,2 mm
- Servo hoorn: 25Z (niet meegeleverd)
Ride TR09 Slick Tires (belted) on 10-Spoke Wheel, unglued (4)
€ 23,95
NIEUW voor ETS seizoen #17 2024/25
De Ride TR09 slickbanden hebben een stoffen inleg en worden geleverd op een 10-spaaks velg.
De goede eigenschappen van de TR09 banden maken ze een zeer goede keuze voor de FWD klasse!
Matrix 1:10 F1 Rear Foam Tire 35 Shore, precut 62mm
€ 15,95
Matrix 1:10 F1 Rear Foam Tire 35 Shore, precut 62mm
DE BAND VOOR TOS EN ETS 2024
Matrix sponsrubber achterbanden voor de 1:10 Formule 1 klasse.
De banden hebben een hardheid van 35 Shore en zijn geslepen tot een diameter van 62 mm.
De Matrix velgen zijn voorzien van de gebruikelijke zeskant aandrijving en passen daardoor op bijna alle gangbare 1:10 Formule 1 RC auto's!
Inhoud: 1 paar sponsrubber achterbanden (35 Shore), klaar geschuurd en op velgen gelijmd.
Technische specificatie
| Onroad: | Formule 1 |
| Product Type: | Wielen |
Matrix 1:10 F1 Front Foam Tire 50 Shore, precut 59mm
€ 15,95
Matrix 1:10 F1 Front Foam Tire 50 Shore, precut 59mm
DE BAND VOOR TOS EN ETS 2024
DE BAND VOOR TOS EN ETS 2024
Matrix sponsrubber voorbanden voor de 1:10 Formule 1 klasse.
De banden hebben een hardheid van 50 Shore en zijn geslepen tot een diameter van 59 mm.
De Matrix velgen passen op bijna alle gangbare 1:10 Formule 1 RC wagens met kogelgelagerde vooras!
Inhoud: 1 paar sponsrubberen voorbanden (50 Shore), klaar geschuurd en op velgen gelijmd.
De banden hebben een hardheid van 50 Shore en zijn geslepen tot een diameter van 59 mm.
De Matrix velgen passen op bijna alle gangbare 1:10 Formule 1 RC wagens met kogelgelagerde vooras!
Inhoud: 1 paar sponsrubberen voorbanden (50 Shore), klaar geschuurd en op velgen gelijmd.
Technische specificatie
| Onroad: | Formule 1 |
| Product Type: | Wielen |
Power HD GTS-3 Low Profile (0.055s/30.0kg/8.4V) Brushless Servo
€ 129,95
Specifications:
| Torque | (6.0V): 20.0 kg-cm / (277.7 oz/in) (7.4V): 26.0 kg-cm / (361.1 oz/in) (8.4V): 30.0 kg-cm / (416.6 oz/in) |
| Speed | 0.083 sec (6.0V) 0.067 sec (7.4V) 0.055 sec (8.4V) |
| Operating Voltage | 6.0 ~ 8.4 DC Volts |
| Weight | 63 g (2.22 oz) |
| Bearing Type | Ball Bearing x 2 |
| Motor Type | Brushless Motor |
| Gear Type | 7075+Steel |
| Max Current | 4.0A |
| Operating Temperature | -20℃~60℃ |
| Working Frequency | 1520μs / 1666hz |
| Size | 41.0 x 20.0 x 29.0 mm (1.61 x 0.79 x 1.14 in) |
Hobbywing Xerun XR10 Pro WP Brushless ESC 160A, 2s LiPo(PRE ORDER)
€ 227,50
Product information "Hobbywing Xerun XR10 Pro WP Brushless ESC 160A, 2s LiPo"
The XR10 Pro WP is an ideal ESC for various 1/10 racing situations as well as for touring cars, and has been upgraded with a series of technological advancements to bring it up to the latest standards. This includes, for example, the intelligent fan, which only cools when it is truly necessary. This saves power and ensures that the controller always operates at the optimal temperature. Equipped with a 32-bit M4 microprocessor, the data processing performance is also greatly enhanced, allowing the ESC to not only respond faster but also perform more complex and accurate data calculations. And with the built-in switchable BEC, even servos that normally require higher voltages can be used.
The ESC is compatible with a variety of programming options, but You can get the most out of it with the OTA programming module and a smartphone. Because with this, thanks to real-time data recording, You have access to information about how throttle, voltage, temperatures, and RPM behaved during the last race, allowing You to identify potential issues and address them specifically on the next race. At the same time, the controller can be easily and quickly programmed via Bluetooth using your smartphone.
For example, enjoy the ride with the integrated softening function, which can be adjusted to Your desired driving feel depending on Your personal preferances. Even throttle response can be finely adjusted within a curve range of -10 to +10. And when things get wild, XR10 Pro WP users can benefit from maximized braking force of up to 150%.
Stay cool and have fun while also having full control.
Features:
- 9 selectable profiles for all 1/10 RC car races
- Waterproof and dustproof according to IP-67 standard
- Separate PRG/FAN port for the fan and programming
- Variable frequency control of PWM and brake frequencies
- Softening function for milder or wilder driving control and better driving efficiency
- Data logging of temperature, RPM, and more
- Firmware upgrades possible to always be up to date
- Various protection functions against:
- Reverse polarity
- Overheating
- Low voltage cutoff
- Signal loss
Technical Specifications:
| Type: | Brushless, Sensored |
| Current (cont./peak): | 160A / 1200A |
| Input Voltage: | 2S Lipo |
| BEC: | 5V - 7.4V @ 5A (Switch Mode) |
| Motor Types: | Brushless motors (sensored/sensorless) |
| Fan: | 25 x 25 x 10mm, powered by BEC |
| Programming: | LCD Program Box G2, LCD Program Box Pro, OTA Program Module, seperate programming port |
| Dimensions: | 37.7 x 37.2 x 19.6mm |
| Weight: | 95.6g (/w cable) |
| Applications: | 1/10 Touring cars & Buggy Racing, Drift, F1, Rally |
Accessories (optional):
HW30502001 LCD Program Box G2
HW30502002 LCD Program Box Pro
HW30850400 OTA Program Module
TAMIYA Motul Autech Z Body Parts Set WB257mm
€ 47,50
Tamiya kondigt met trots aan dat de onderdelen van onze onlangs aangekondigde 1/10 R/C Motul Autech Z (TT-02) kit (Item 58735) ook als afzonderlijk item te koop zijn.
Inhoud/informatie:
- De authentieke vorm van de Motul Autech Z is in stijl gevangen door een lichtgewicht, stijve polycarbonaat body met aparte polycarbonaat voor- en achterlichtkappen (LED's kunnen niet worden bevestigd) en canards.
- Afzonderlijke zwarte ABS kunststof onderdelen geven de kenmerkende zijspiegels en een grote achtervleugel realistisch weer.
- Inclusief markeringsstickers en maskeerstickers voor gebruik tijdens het schilderen.
- Metalen onderdelen voor bevestiging zijn ook inbegrepen.
- Compatibel met auto's met TT-01, TT-01 Type-E, TT-02 (exclusief TT-02B en TT-02T), TC-01, TA06, TA07, TA08 en TB-05 chassis. (Chassis met korte wielbasis kunnen niet worden gebruikt).
- Let op: chassis met breed loopvlak achter moet worden vervangen door chassis met smal loopvlak.
- Wordt geleverd in een mooie, speciale kartonnen doos.
Â