info

Je hebt het minimaal aantal bereikt

Winkelwagen (0)

Er zijn nog geen producten in uw winkelwagen geplaatst.

XRAY X4

XRAY-X4
Weergave:


Bezig met laden...
1up Racing Competition Bearing Set - Xray X4

Snel bekijken

(0)
Niet op voorraad
1up Racing Competition Bearing Set - Xray X4

1up Racing Competition Bearing Set - Xray X4

(0)
€ 38,95

1up Racing Competition Bearing Set - Xray X4
Complete bearing set from 1upRacing for your Xray X4 touring car. This bearing set will bring the best quality and efficiency to your ride and you shouln`t wait to get your hands on them!
Features of the 1up Racing ball bearing sets:
  •  
  • Pre-Oiled with 1up Racing Clear Bearing Oil
  • Improves Overall Feel and Responsiveness
  • Improves Corner Speed
  • Reduces Drivetrain Resistance
  • Excellent Lifespan
  • Excellent Value
Pro Tip: "Even if you care about your bearings frequently, you must replace them from time to time. We cannot point out the perfect timing for changing all your bearings as this depends a lot on the frequency you are using your car in general. But when you are changing from outdoor to indoor season (or vice versa), it is always a good moment to refresh your car with some new bearings!"

AXON Precision Shock Bladder Type FLEX NBR (4pcs·for Yokomo BD9, Xray T4)

Snel bekijken

AXON Precision Shock Bladder Type FLEX NBR (4pcs·for Yokomo BD9, Xray T4)

AXON Precision Shock Bladder Type FLEX NBR (4pcs·for Yokomo BD9, Xray T4)

(0)
€ 7,49

AXON Precision Shock Bladder Type FLEX NBR (4pcs·for Yokomo BD9, Xray T4)

Hex Screw Sfh M2.5X8 (10)

Snel bekijken

(0)
Op voorraad
Hex Screw Sfh M2.5X8 (10)

Hex Screw Sfh M2.5X8 (10)

(0)
€ 5,95

Hex Screw Sfh M2.5X8 (10)

Hex Screw Sh M3X10 (10)

Snel bekijken

(0)
Op voorraad
Hex Screw Sh M3X10 (10)

Hex Screw Sh M3X10 (10)

(0)
€ 5,95

Hex Screw Sh M3X10 (10)

HIRO SEIKO X4'22 Titan/Alum Hex Socket Screw Set

Snel bekijken

(0)
Op voorraad
HIRO SEIKO X4'22 Titan/Alum Hex Socket Screw Set

HIRO SEIKO X4'22 Titan/Alum Hex Socket Screw Set

(0)
€ 69,95

  • ITEM NUMBER
    48676
  • DESCRIPTION
    X4'22 Titan/Alum Hex Socket Screw Set
  • COLOR
    Black
  • USE FOR
    Xray
  • SERIES
    X4 2022
  • REMARK

    ◆ 119 pcs

Hiro Seiko Xray X4'22 Alu Black & Titan Screw Set (115pcs)

Snel bekijken

(0)
Niet op voorraad
Hiro Seiko Xray X4'22 Alu Black & Titan Screw Set (115pcs)

Hiro Seiko Xray X4'22 Alu Black & Titan Screw Set (115pcs)

(0)
€ 69,95

Hiro Seiko Xray X4'22 Alu Black & Titan Screw Set (115pcs)

Power HD S15-X Servo for XRAY X4

Snel bekijken

(0)
Niet op voorraad
Power HD S15-X Servo for XRAY X4

Power HD S15-X Servo for XRAY X4

(0)
€ 129,99

Power HD S15-X Servo for XRAY X4


The PowerHD S15 Servo is now available with a “Direct Mount” for the Xray X4 touring car!

This Digital Brushless Low Profile Servo from Power HD with the name “S15” is one of  the most valuable servos on the market right now. It has all you need to drive your racecar to the win. The full machined aluminum case makes it very durable, and the torque and speed of this servo is really outstanding. Check out the features of the S15 to see what it`s all about!

Features of the PowerHD S15 Servo:

·         Power HD S15 Servo with “Direct Mount” for the Xray X4
·         Torque(6.0V): 11.5 kg-cm
·         Torque(7.4V): 15.0 kg-cm
·         Speed: 0.072 sec (6.0V) │ 0.060 sec (7.4V)
·         Operating Voltage:6.0 ~ 8.4 DC Volts
·         Weight: 52.0 g
·         Bearing Type:Ball Bearing x 2
·         Motor Type:Digital Brushless Motor
·         Gear Type:Titan & Aluminum
·         Size:41.0 x 20.0 x 26 mm
·         Receiver wire: 80mm length, black, JR Connector
·         Servohorn: 25 teeht (not included)

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 1.5mm

Snel bekijken

(0)
Op voorraad
RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 1.5mm

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 1.5mm

(0)
€ 19,99

Changing roll centres on your X4 has never been easier, rather than undoing the whole screw and having shims flying everywhere, simply loosen the screw, slide the shim plate out, and install the new roll centre shim plate, and re-tighten the screws! 

With the success of our Carbon Roll Centre Shim Plates, and the ever demanding focus on weight distribution and adding additional weight down low on the Mid Motor platform, we decided to produce brass versions in the most common thicknesses used today. 

Available in commonly used 1.5mm, 2.0mm, 2.5mm and 3.0mm thicknesses, it gives you a great range of roll centre options to choose from, whilst being able to move weight around your car to adjust the front/rear weight bias. Whilst these may not be a large amount of weight, due to the placement on the car being very far from the centreline, it can have quite a big impact on the handling of your car.

We suggest running them both front, and rear. However if you feel you need more steering, you could replace the front with carbon and leave the rear brass. If you have too much steering and need more rear traction, then you could leave them in the front only, and use carbon in the rear.

These can also be stacked with the carbon 0.5mm and 1mm Shim Plates if desired.

Each pack comes with a pair of front and rear (different lengths) identified by the one (front) or two (rear) indents.

Features:
  • Easy roll centre adjustment 
  • 4 Different Thicknesses available for different roll centres (1.5, 2.0, 2.5, 3.0)
  • 1.5mm Set adds 6g of weight at the lowest point of the car
  • Adds weight at ends of the car to adjust weight bias
  • Can be used with any brand Chassis plate
  • CNC Machined from high quality Brass in Melbourne, Australia 
Includes:
  • 2x Front 1.5mm Brass Roll Centre Shim Plates
  • 2x Rear 1.5mm Brass Roll Centre Shim Plates 

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 2.0mm

Snel bekijken

(0)
Op voorraad
RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 2.0mm

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 2.0mm

(0)
€ 19,99

Changing roll centres on your X4 has never been easier, rather than undoing the whole screw and having shims flying everywhere, simply loosen the screw, slide the shim plate out, and install the new roll centre shim plate, and re-tighten the screws! 

With the success of our Carbon Roll Centre Shim Plates, and the ever demanding focus on weight distribution and adding additional weight down low on the Mid Motor platform, we decided to produce brass versions in the most common thicknesses used today. 

Available in commonly used 1.5mm, 2.0mm, 2.5mm and 3.0mm thicknesses, it gives you a great range of roll centre options to choose from, whilst being able to move weight around your car to adjust the front/rear weight bias. Whilst these may not be a large amount of weight, due to the placement on the car being very far from the centreline, it can have quite a big impact on the handling of your car.

We suggest running them both front, and rear. However if you feel you need more steering, you could replace the front with carbon and leave the rear brass. If you have too much steering and need more rear traction, then you could leave them in the front only, and use carbon in the rear.

These can also be stacked with the carbon 0.5mm and 1mm Shim Plates if desired.

Each pack comes with a pair of front and rear (different lengths) identified by the one (front) or two (rear) indents.

Features:
  • Easy roll centre adjustment 
  • 4 Different Thicknesses available for different roll centres (1.5, 2.0, 2.5, 3.0)
  • 1.5mm Set adds 6g of weight at the lowest point of the car
  • Adds weight at ends of the car to adjust weight bias
  • Can be used with any brand Chassis plate
  • CNC Machined from high quality Brass in Melbourne, Australia 
Includes:
  • 2x Front 2.0mm Brass Roll Centre Shim Plates
  • 2x Rear 2.0mm Brass Roll Centre Shim Plates 

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 2.5mm

Snel bekijken

(0)
Niet op voorraad
RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 2.5mm

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 2.5mm

(0)
€ 19,99

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 2.5mm

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 3.0mm

Snel bekijken

(0)
Op voorraad
RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 3.0mm

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 3.0mm

(0)
€ 19,99

Changing roll centres on your X4 has never been easier, rather than undoing the whole screw and having shims flying everywhere, simply loosen the screw, slide the shim plate out, and install the new roll centre shim plate, and re-tighten the screws! 

With the success of our Carbon Roll Centre Shim Plates, and the ever demanding focus on weight distribution and adding additional weight down low on the Mid Motor platform, we decided to produce brass versions in the most common thicknesses used today. 

Available in commonly used 1.5mm, 2.0mm, 2.5mm and 3.0mm thicknesses, it gives you a great range of roll centre options to choose from, whilst being able to move weight around your car to adjust the front/rear weight bias. Whilst these may not be a large amount of weight, due to the placement on the car being very far from the centreline, it can have quite a big impact on the handling of your car.

We suggest running them both front, and rear. However if you feel you need more steering, you could replace the front with carbon and leave the rear brass. If you have too much steering and need more rear traction, then you could leave them in the front only, and use carbon in the rear.

These can also be stacked with the carbon 0.5mm and 1mm Shim Plates if desired.

Each pack comes with a pair of front and rear (different lengths) identified by the one (front) or two (rear) indents.

T-Work`s 0.5mm Front Roll Center Spacer ( For Xray X4 ) 2pcs.

Snel bekijken

(0)
Niet op voorraad
T-Work`s 0.5mm Front Roll Center Spacer ( For Xray X4 ) 2pcs.

T-Work`s 0.5mm Front Roll Center Spacer ( For Xray X4 ) 2pcs.

(0)
€ 8,99

T-Work`s 0.5mm Front Roll Center Spacer ( For Xray X4 ) 2pcs.


Deze website gebruikt cookies om het bezoek te meten, we slaan geen persoonlijke gegevens op.
Accepteer geselecteerde cookies