info

Je hebt het minimaal aantal bereikt

Winkelwagen (0)

Er zijn nog geen producten in uw winkelwagen geplaatst.

Nieuwste producten

Axon Spur Gear TCS 64P 102T - GS-T6-102
Nieuw!

Snel bekijken

Bestellen

(0)
Op voorraad
Axon Spur Gear TCS 64P 102T - GS-T6-102

Axon Spur Gear TCS 64P 102T - GS-T6-102

(0)
€ 8,95

Axon Spur Gear TCS 64P 102T - GS-T6-102

Mon-Tech Montecarlo Touring Electric Car Clear Body 190mm - 019-013
Nieuw!

Snel bekijken

Bestellen

Mon-Tech Montecarlo Touring Electric Car Clear Body 190mm - 019-013

Mon-Tech Montecarlo Touring Electric Car Clear Body 190mm - 019-013

(0)
€ 24,95

Mon-Tech Montecarlo Touring Electric Car Clear Body 190mm - 019-013

HUDY TIRE ADDITIVE - TIRE GRIPPER RED - 50ML - 106261

Snel bekijken

Bestellen

(0)
Op voorraad
HUDY TIRE ADDITIVE - TIRE GRIPPER RED - 50ML - 106261

HUDY TIRE ADDITIVE - TIRE GRIPPER RED - 50ML - 106261

(0)
€ 28,50

• Specially developed and mixed
• For both asphalt and carpet tracks
• For low and very-low traction conditions
• For rubber tires
• Generates higher traction
• Increases stability
• Easy to drive

Excellent tire additive for both asphalt and carpet tracks. The Red additive was specially developed and mixed for low and very-low traction conditions. Using the Red additive the tires generate higher traction. The additive was developed and tested by top on-road drivers to achieve maximum traction while keeping the car stable and easy to drive. Developed for rubber tires.
 

XRAY X12'20 US SPECS - 1/12 PAN CAR - 370012

Snel bekijken

Bestellen

(0)
Op voorraad
XRAY X12'20 US SPECS - 1/12 PAN CAR - 370012

XRAY X12'20 US SPECS - 1/12 PAN CAR - 370012

(0)
€ 337,95

2020 All-New:

  • World Championship, ROAR National Championship and EFRA European Championship winning platform
  • All-new narrower chassis minimizes contact with the track surface during cornering
  • All-new side link mounting system via aluminum and graphite holders
  • All-new removable front suspension brace that allows steering response adjustment
  • All-new center shock absorber holders which updates the mounting positions and geometry to improve on-power steering
  • All-new servo holders with extra mounting positions for smaller servos
  • Includes graphite composite front upper arms to increase steering response
  • Includes lighter pod brace holder from graphite composite material to increase consistency and to resist flexing
  • All-new graphite backstop for battery pack in cross-chassis alignment alternative
  • Available in EU edition and US edition each suitable for different track conditions

XRAY X12'20 EU SPECS - 1/12 PAN CAR - 370011

Snel bekijken

Bestellen

(0)
Op voorraad
XRAY X12'20 EU SPECS - 1/12 PAN CAR - 370011

XRAY X12'20 EU SPECS - 1/12 PAN CAR - 370011

(0)
€ 337,95

2020 All-New:

  • World Championship, ROAR National Championship and EFRA European Championship winning platform
  • All-new narrower chassis minimizes contact with the track surface during cornering
  • All-new side link mounting system via aluminum and graphite holders
  • All-new removable front suspension brace that allows steering response adjustment
  • All-new center shock absorber holders which updates the mounting positions and geometry to improve on-power steering
  • All-new servo holders with extra mounting positions for smaller servos
  • Includes graphite composite front upper arms to increase steering response
  • Includes lighter pod brace holder from graphite composite material to increase consistency and to resist flexing
  • All-new graphite backstop for battery pack in cross-chassis alignment alternative
  • Available in EU edition and US edition each suitable for different track conditions

Protoform Turismo Clear Body Lightweight 190mm - 1570-25

Snel bekijken

Bestellen

(0)
Op voorraad
Protoform Turismo Clear Body Lightweight 190mm - 1570-25

Protoform Turismo Clear Body Lightweight 190mm - 1570-25

(0)
€ 28,95

3X 2019 ROAR Electric Paved National Champion Body - Modified, 17.5 & 21.5 Classes

Electric touring car racing has undergone yet another evolution since the multi-national championship-winning Type-S was released in 2017. Catering to the demands of racers needing ultra high-downforce, super low-CG aerodynamic bodyshells, PROTOform is proud to release its latest contender for 190mm touring car racing: the Turismo.

Designed and produced using the latest in 3D CAD and 5-axis milling technology, the Turismo is packed with new features for outstanding performance on the track and ease-of-mounting while preparing to dominate the competition. 

Let’s start with some of the new aerodynamic features:

  • Radical high-downforce design with lowered nose and trunk sections
  • Cab-forward layout with extended A-pillar ribs for precise turn-in steering
  • Extended decklid length with spoiler lip for massive rear grip
  • Rear wing posts moved outwards for increased stiffness and anti-tuck protection
  • Rear decklid stiffening ribs tied directly into the wing posts to reduce rear body flex
  • Sculpted side door panels for increased stiffness and side bite
 

Along with the extensive aerodynamic upgrades, the Turismo also features the easiest mounting of any PROTOform body yet. Returning are our signature Mounting Marks inside the front wheel arches, allowing you to choose your body positions in 2mm increments up to +8mm. Added to this is a 100mm wide grid with hashmarks on the trunk and 70mm wide markings on the hood to easily line-up your body posts. When used in combination, all three mounting grids will allow for perfect, repeatable mounting every time.

The Turismo is Global Body Spec compliant & ROAR Approved. Made in the USAfrom our high-quality, super-durable polycarbonate, it is available in both X-Lite (0.5mm, about 70g race ready) and Light Weight (0.7mm, perfect for ETS-spec 85g weight minimum) weights. Included with the body are our convenient plastic wing buttons and under-wing “nuts”, with M3 mounting screws. A stylish decal sheet, window masks, and overspray film complete the package.

OfficinaRC 23gr Std Battery Plate - OFC-005

Snel bekijken

(0)
Niet op voorraad
OfficinaRC 23gr Std Battery Plate - OFC-005

OfficinaRC 23gr Std Battery Plate - OFC-005

(0)
€ 22,90

A new line of 3 Battery plates is added to the already existing OfficinaRC 32g (OFC-004).

These battery plates are designed to give all the possible balancing possibilities for your models.

Usable for all categories On road and Off road thanks to the diversity of weight they allow an optimal balance for all needs.

The OfficinaRC 23gr (OFC-005) 131mmx34.5mmx0.6mm is designed to be used with a standard measurement battery. This plate can be applied using double-sided tape on the battery or directly on the chassis.

XRAY Shock Absorber Membranes - Low - 308081

Snel bekijken

Bestellen

(0)
Op voorraad
XRAY Shock Absorber Membranes - Low - 308081

XRAY Shock Absorber Membranes - Low - 308081

(0)
€ 9,95

Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment. 
The new Low-profile Membranes must be used with #308091 Low-profile Shock Foam Inserts, and will fit any XRAY shocks. Set of 4.

XRAY Ball-Bearing 5x8x2.5 Flanged - Steel Sealed - Oil (2) - 950508

Snel bekijken

(0)
Niet op voorraad
XRAY Ball-Bearing 5x8x2.5 Flanged - Steel Sealed - Oil (2) - 950508

XRAY Ball-Bearing 5x8x2.5 Flanged - Steel Sealed - Oil (2) - 950508

(0)
€ 3,95

XRAY Ball-Bearing 5x8x2.5 Flanged - Steel Sealed - Oil (2) - 950508

XRAY Composite Rear Body Back Stop (2) - 331340

Snel bekijken

Bestellen

(0)
Op voorraad
XRAY Composite Rear Body Back Stop (2) - 331340

XRAY Composite Rear Body Back Stop (2) - 331340

(0)
€ 6,95

Composite body back stop set for 1/10 touring cars (electric or nitro), made from lightweight composite material, provides support for the rear of body shell to prevent tucking under the rear wheels due to a collision from the rear, thus reducing lost racing time and increasing body lifespan. Posts are quickly & easily mounted, and are trimmmable for perfect fitment. Set of two, includes mounting hardware.

Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

Snel bekijken

(0)
Niet op voorraad
Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

(0)
€ 355,00

Maximum Charge Power 1400W at >26V (1000W max. per channel)
Charge Current Range 5mA - 40A per channel (up to 70A in synchronous mode)
Discharge Current Range 5mA - 40A per channel (up to 70A in synchronous mode)
Input Voltage 10 - 30V DC
Input Current 60A (47A single channel maximum)
Maximum Discharge 80W per channel (up to 140W in synchronous mode)
Maximum Regenerative Discharge 1000W per channel (up to 1400W in synchronous mode)
Maximum External Discharge 1000W per channel (up to 2000W in synchronous mode)
Current Drain For Balancing 1.2A per channel (up to 2.4A in synchronous mode)
Balance Accuracy 10mV
LiPo/LiIo/LiFe 1 - 6 series
NiCd/NiMh Cell Count 1 - 25 series
Pb Battery Cell Count 1 - 18 series
Battery Setup Memories 64 user presets
Intelligent Temperature Control Yes
USB Charging Port 5V , 1A (1.2A current limiting protection)
PC Connectivity Mini USB 2.0
Dimensions 171x118x59mm
Weight 910g

Hobbywing XeRun XR10 Pro G2 160A ESC - Orange - 30112607

Snel bekijken

(0)
Niet op voorraad
Hobbywing XeRun XR10 Pro G2 160A ESC - Orange - 30112607

Hobbywing XeRun XR10 Pro G2 160A ESC - Orange - 30112607

(0)
€ 214,95

The XR10 Pro G2 ESC is designed for 1/10th and 1/12th RC car racing.

IT features a 32-bit microprocessor, built-in BEC with maximum current of 10A and voltage adjustable from 5 to 7.4v, battery-protection circuit, dual-switch control, adjustable maximum brake force (extended to 150%) and PWM & Brake frequencies and Turbo increase & decrease rates, and switchable motor direction (CCW/CW)


Upgraded M4 Microprocessor (32-bit) for
Professional Racing

High-performance 32-bit M4 microprocessor is implemented in the XR10PRO G2 for Super-fast and precise processing of complicated data operations, this allows the ESC to have a very rapid and precise response with extraordinary potential to optimize and extend its functions further. The XR10 PRO G2 is an exceptional piece of Hardware combined with accurate and powerful software makes this ESC into a “Precise weapon” for high end professional racing.

Internal Battery-Reverse Polarity Protection Circuit

With the Built-in Reverse Voltage Protection circuit, ESC's internal parts are all protected from Cross Connection of battery power. 
(Note: the overall power system will be protected from damage when non-polarized filter capacitors are used; the standard electrolytic (external capacitors ) supplied for this ESC have no reverse polarity protection, so the capacitors (only) ,not the ESC will be damaged  when reverse polarity installation occurs.)

Innovative Dual-Switches / Removable External Switch

Internal electronic switch & external removable switch for easy and convenient  usage. The internal switch simplifies wiring while the external switch solves the issue “it’s hard to reach the built-in switch when the car body is mounted on or  inner chassis placement of ESC”. External switch is perfect for off-road applications. (Warning! This is Hobbywing’s registered patented)


Updated Drive, and Brake PWM Frequency


More available frequency values (include "Customized PWM Frequencies") for improved tuning options of the drive and brake feel.

 

Drive PWM:1-32KHz
Brake PWM:0.5-16KHz


Tunable Turbo Increase & Decrease Rates

More fine tunable values have been implemented for Turbo Increase & Decrease Rates which allows the end user to fine tune the turbo for optimal performance when racing at different size tracks .


Switchable Motor Direction

Switchable motor direction: CCW & CW for various chassis.


Super Internal BEC

Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step:0.1V) for usage with high voltage servos.


Softening Function (Hobbywing’s Patented Technology)

Softening function implemented in this ESC allows user to fine-tune the bottom end allowing for maximum controlled power of vehicles used in Modified class racing applications.


Programming/Upgrading/Data Reading Wirelessly

With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the Hobbywing WiFi Link App installed), users can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.


Data-logging Function

This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use. In the future, new (ESC) firmware will not only record the maximum temperatures, RPM and others but also provide complete operation (status) curve for users.


Lexan RC PAINT 150ml - Size : White - 0710

Snel bekijken

Bestellen

(0)
Op voorraad
Lexan RC PAINT 150ml - Size : White - 0710

Lexan RC PAINT 150ml - Size : White - 0710

(0)
€ 7,90

Lexan RC PAINT 150ml - Size : White - 0710

Lexan RC PAINT 150ml - Size : Fluo Red - 1005

Snel bekijken

Bestellen

(0)
Op voorraad
Lexan RC PAINT 150ml - Size : Fluo Red - 1005

Lexan RC PAINT 150ml - Size : Fluo Red - 1005

(0)
€ 7,90

Lexan RC PAINT 150ml - Size : Fluo Red - 1005

Lexan RC PAINT 150ml - Size : Fluo Orange - 1006

Snel bekijken

Bestellen

(0)
Op voorraad
Lexan RC PAINT 150ml - Size : Fluo Orange - 1006

Lexan RC PAINT 150ml - Size : Fluo Orange - 1006

(0)
€ 7,90

Lexan RC PAINT 150ml - Size : Fluo Orange - 1006

Lexan RC PAINT 150ml - Size : Fluo Green - 1008

Snel bekijken

Bestellen

(0)
Op voorraad
Lexan RC PAINT 150ml - Size : Fluo Green - 1008

Lexan RC PAINT 150ml - Size : Fluo Green - 1008

(0)
€ 7,90

Lexan RC PAINT 150ml - Size : Fluo Green - 1008

Bestsellers

Rush 36X Pre-glued Tire 36deg (4Tires with wheel and inserts) - RS-PGA36X

Snel bekijken

Bestellen

Rush 36X Pre-glued Tire 36deg (4Tires with wheel and inserts) - RS-PGA36X

Rush 36X Pre-glued Tire 36deg (4Tires with wheel and inserts) - RS-PGA36X

(0)
€ 31,89

Rush 36X Pre-glued Tire 36deg (4Tires with wheel and inserts) - RS-PGA36X

Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs - VT-V5T-PG36R

Snel bekijken

Bestellen

Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs - VT-V5T-PG36R

Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs - VT-V5T-PG36R

(0)
€ 29,90

Product information "Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs"
The new "T" type tire carries the same high quality combination from the original V5, however with a new minimal air gap and new "Tough" rubber content. Making this the ideal tire choice, if longevity and stability is your preference. 
Best performs at outdoor asphalt tracks.

The latest establishment from Volante's tyre development brings you the premium Volante V5 tyre. Developed by Word Champions, the Version 5 combines maximum speed with maximum longevity. 
Tested on a variety of tracks around the world, the V5 provides superior traction to any other tyre, whilst limiting the "drop off" experienced by many other tires on the market. The tyre and wheel combination is perfectly true, meaning no vibration when driving. Minimum excess moulding material makes it unnecessary to "sand" or "cut" the line from now, making it less time consuming and risky preparing new tires. 
Volante V5's will be able to provide you with premium traction and longevity in any condition.

MobGums 1/12 dishers rear tyres silver compound for ETS carpet - MOBR135
-4%

Snel bekijken

Bestellen

(0)
Op voorraad
MobGums 1/12 dishers rear tyres silver compound for ETS carpet - MOBR135

MobGums 1/12 dishers rear tyres silver compound for ETS carpet - MOBR135

(0)
€ 9,90 € 9,50

MobGums 1/12 dishers rear tyres silver compound for ETS carpet - MOBR135

ZooRacing DOGSBOLLOX Standard - ZR-0005-07

Snel bekijken

Bestellen

(0)
Op voorraad
ZooRacing DOGSBOLLOX Standard - ZR-0005-07

ZooRacing DOGSBOLLOX Standard - ZR-0005-07

(0)
€ 26,95

The DogsBollox body shell for 190mm touring cars is ZooRacing’s third touring car body shell. Developed as an outright low centre of gravity body the lid features a 6mm lower trunk section – including the rear wing – for greater corning speeds, a more agile handling and less weight distribution changes. In addition to the low rear end the body also offers a super low front end which further adds to the aggressive LCG aero package. When run on high to very high-grip surfaces drivers will experience a lot less traction rolling issues even when using the body in the new 90g ETS weight rule configuration.

The body is an evolution of the PreoPard and thus offers exceptional overall downforce and stability, making it ideal for the higher speeds of the 13.5T Pro Stock and Modified classes. The shell offers several aero features, such as a recessed roof section for less drag, that channels the airflow towards the rear wing for great rear end stability at both low and high speeds while the forward placed cabin and the specially shaped front end produce more steering compared to the ZooZilla as well as greater rotation in corners for greater corner speeds and a more nimble handling.

The body is outfitted with several trick anti-tuck features such as structured side skirts and a clever rear end design including reinforcement ribs on the trunk lid, all of which add to the overall aerodynamics and looks while greatly preventing body tucks without the need for additional reinforcements. Adding to the whole package is the recessed roof section that not only adds visual impact but also greatly improves overall stability – something that comes in handy especially when running the body in ultra lightweight configuration.

Other hot features include large wheel arches that allow the body to be placed up to 4mm to the front for increased steering reaction or up to 4mm to the back for increased rear stability – making it 8mm in total. All this can be done without having to fear tyre rubs or unsightly cut out wheel wells. The body, designed using the latest CAD techniques also features a 100mm grid for the rear body mounts, ensuring highly precise body placement and mounting.

The DogsBollox 190mm body shell comes moulded from high-quality polycarbonate and it is available in two thicknesses: a lightweight 0.5mm variant that will weigh in at around 55g cut and including wing while the standard thickness 0.7mm variant will come out at around 83g cut and including wing - meaning the latter will easily make the new 90g ETS rule.​

Part of the package are also the revolutionary 2-step window masks that will ensure window frames of Pro quality. In a first step all windows are masked using the Step 1 masks. After the painting of the body is completed, the masks will be removed and replaced by the slightly smaller Step 2 masks that leave the window frames exposed and ready to be painted in your favourite colour. The result is highly precise without the need to pre-cut or in-body-cut the window masks, ensuring greater satisfaction and less chances of creating predetermined breaking points. The body package is rounded out by high-quality wing mounting hardware and a detailed sticker sheet including grille, head and tail lights.
 

Features:

– CAD designed
– Specialised LCG body shell for technical high to very high-grip tracks. Lots of steering, high overall downforce for increased rotation and faster cornering especially in 13.5T Pro Stock and Modified racing classes and when running in medium to high-grip conditions
– Super-low and steep front end
– Recessed roof to channel the airflow and for greatly improved structural stability thanks to static reinforcement
– Reinforcement ribs on the trunk
– Structured rear end for anti-tuck capabilities
– Large wheel arches allow the body to be placed 4mm front or back (8mm in total)
– Large wheel arches ensure the tyres will not rub in whatever position
– Anti-tuck capabilities with structured side skirts
– Static reinforcement on the hood. Especially useful when running the ultra lightweight variant
– 0.5mm ultralight body weighs in at about 55g cut & including wing
– 0.7mm standard body weighs in at about 83g cut & including wing
– Detailed decal sheet
– 2-step window masks
– Wing mounting hardware
– 100mm grid on the rear truck lid for easy and convenient body mounting
– Designed to meed GBS rules
– EFRA approved
– BRCA approved

MobGums 1/12 dishers front tyres white compound for ETS carpet - MOBF035
-5%

Snel bekijken

(0)
Niet op voorraad
MobGums 1/12 dishers front tyres white compound for ETS carpet - MOBF035

MobGums 1/12 dishers front tyres white compound for ETS carpet - MOBF035

(0)
€ 9,50 € 9,00

MobGums 1/12 dishers front tyres white compound for ETS carpet - MOBF035

MobGums 1/12 dishers rear tyres white compound for ETS carpet - MOBR335
-4%

Snel bekijken

Bestellen

(0)
Op voorraad
MobGums 1/12 dishers rear tyres white compound for ETS carpet - MOBR335

MobGums 1/12 dishers rear tyres white compound for ETS carpet - MOBR335

(0)
€ 9,90 € 9,50

MobGums 1/12 dishers rear tyres white compound for ETS carpet - MOBR335

Ride 1/10 Slick Tires Precut 24mm Pre-glued with 16 Spoke Wheel White 4pcs - 24025PG

Snel bekijken

Bestellen

Ride 1/10 Slick Tires Precut 24mm Pre-glued with 16 Spoke Wheel White 4pcs - 24025PG

Ride 1/10 Slick Tires Precut 24mm Pre-glued with 16 Spoke Wheel White 4pcs - 24025PG

(0)
€ 20,95

Ride 1/10 Slick Tires Precut 24mm Pre-glued with 16 Spoke Wheel White 4pcs - 24025PG

Schumacher Sorex Glued 28R+JB+Revlite24 pk4 - XG-28JB

Snel bekijken

Bestellen

(0)
Op voorraad
Schumacher Sorex Glued 28R+JB+Revlite24 pk4 - XG-28JB

Schumacher Sorex Glued 28R+JB+Revlite24 pk4 - XG-28JB

(0)
€ 28,00

Schumacher Sorex Glued 28R+JB+Revlite24 pk4 - XG-28JB

XRAY Drive Shaft Replacement Plastic Cap 3.5 MM - Orange - Strong - 305242
-12%

Snel bekijken

Bestellen

(0)
Op voorraad
XRAY Drive Shaft Replacement Plastic Cap 3.5 MM - Orange - Strong - 305242

XRAY Drive Shaft Replacement Plastic Cap 3.5 MM - Orange - Strong - 305242

(0)
€ 7,95 € 7,00

XRAY Drive Shaft Replacement Plastic Cap 3.5 MM - Orange - Strong - 305242

XRAY HIGH-PERFORMANCE KEVLAR DRIVE BELT 3 x 144 MM - 305448

Snel bekijken

Bestellen

(0)
Op voorraad
XRAY HIGH-PERFORMANCE KEVLAR DRIVE BELT 3 x 144 MM - 305448

XRAY HIGH-PERFORMANCE KEVLAR DRIVE BELT 3 x 144 MM - 305448

(0)
€ 14,50

XRAY HIGH-PERFORMANCE KEVLAR DRIVE BELT 3 x 144 MM - 305448

XRAY 4S SPRING-SET PROGRESSIVE C = 2.5-2.8 (2) - 308264
-12%

Snel bekijken

Bestellen

(0)
Op voorraad
XRAY 4S SPRING-SET PROGRESSIVE C = 2.5-2.8 (2) - 308264

XRAY 4S SPRING-SET PROGRESSIVE C = 2.5-2.8 (2) - 308264

(0)
€ 9,95 € 8,75

XRAY 4S SPRING-SET PROGRESSIVE C = 2.5-2.8 (2) - 308264

MR33 V3 Asphalt Additive 100ml - MR33-0003

Snel bekijken

Bestellen

(0)
Op voorraad
MR33 V3 Asphalt Additive 100ml - MR33-0003

MR33 V3 Asphalt Additive 100ml - MR33-0003

(0)
€ 14,90

Het smeermiddel voor ETS, NK en Clubwedstrijden. Kan gebruikt worden in combinatie met en zonder bandenwarmers.

Bekijk route

Contact

IJssel 17, Den Haag
Ma - Vr, 09:00 - 17:00