Roll Bar Set - Mi8,FT8 (pk8)SCHUMACHER
Mi8 Anti roll bar set. 

Front and rear.

2x 1.1mm
2x 1.2mm
2x 1.3mm
2x 1.4mm

Steering Pivots Short-K2,KF2,Mi6/evo,KD/C,LD23,ST

Driveshaft Blade - Mi7,Mi8,FT8 (pk4)SCHUMACHER

Ball Bearing 3/16"x5/16" Flanged Yellow (pr)SCHUMACHER
Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

Hexagonal 3D TPU Bumper - FT8

SPEED PACK - Alloy Black M3 Washers - 18pc

Alloy Wheel Hex - Slim pr - Mi4-Mi8,FT,FT8 SCHUMACHER
Used as an option on the front to reduce the king pin off set which gives the car more steering. 

SCHUMACHER 108T x 3.0mm MBL Belt FT8

Double-Joint-Driveshaft-V2-pr-Mi7,FT,Mi8,FT8-SCHUMACHER

Threaded Rectangular 7.5g Weight - (pk4)

SPEED PACK - M3 Nyloc Nut Steel - Black (10pcs)

SPEED PACK - M3 Alloy Nyloc Nuts - Black - pk10

C/F Topdeck (1.6mm) - Neon SCHUMACHER

C/F Rear Shock Mount - Neon SCHUMACHER

Alloy Hub Carrier (Black) - Mi7,Mi8,FT8 (pr)SCHUMACHER
Optional alloy hub carrier for the Mi7 and Mi8, improved strength and precision.

Now hard black anodised as shipped from 01/02/2021.

Perviously green hard anodised.

Diff Spacer Set - A2/3,E4/5,Icon/2 SCHUMACHER
Diff spacers for pan cars.

Includes;

1 x 2.0mm
3 x 0.5mm

M3 Black Alloy Washers 0.5mm (pk12) Item No. U4862 SCHUMACHER

King Pin Spacer - Icon/2 (pr)SCHUMACHER

SPEED PACK - M3x8 Cap Hd (pk10) SCHUMACHER

Alloy Radius Arm - FT8 SCHUMACHER

Longitudinal Stiffening Post - FT8 SCHUMACHER

Titanium Rear Axle (pr) - FT8 SCHUMACHER

SCHUMACHER C/F Upper Link Mount 1 Dot - Mi8,FT8 (pr)

Optional link mount for Mi8 and FT8 used in higher traction for more response and steering.

This differential/spool eccentric allows you to adjust the height of the diff/spool to a new 'High' position compared to the standard kit 'Low' position. 

The smart looking piece as normal is used to adjust the belt tension, as well as being able to fine tune the feeling of the car.

Normally a higher front spool smooths the steering response compared to the standard low kit setting.

A higher rear diff can give the car more drive out of the turns keeping it flatter.  A low standard position normally gives a little more side bite.

A worthwhile item to have available to tune your Mi7 to different track conditions. 

SCHUMACHER-C/F-Bumper-Crash-Stop-Mi8,FT8

Alloy-M3-Turnbuckle-25mm-Black-(pr)SCHUMACHER

Threaded Steel 10g Weight 17.60mm (pk4)

SCHUMACHER Complete Diff - Mi8,FT8

SCHUMACHER Hub Carriers - Mi7,Mi8,FT8 (pr)

C/F Rear Link Mount LH - Mi9

SCHUMACHER-C/F-LiPo-Swivel-pr-Mi7-Mi9,FT,FT8,LD3,ST2

C/F-Gear-Diff-Axle-A1-3,Icon/2-SCHUMACHER
Carbon Fibre axle for the Icon and Atom gear diff.

Lightweight for the ultimate performance.

8g lighter than kit steel version.

Xray Xlp2 Silicone Hyper Resistant Shock Absorber Membrane (4)

Xray Hex Screw 110° Sfh M3x8 - Cnc Machined - Hudy Spring Steel (4)

Xray Hex Screw 110° Sfh M3x5 - Cnc Machined - Hudy Spring Steel (4)

MR33 Brass Battery Weight Plate 30g (1)

MR33 Brass Battery Weight Plate Short 20g (1)

Met deze plaat kun je gemakkelijk en snel 20g gewicht onder je batterij plaatsen.

Inhoud: 1 messing batterijgewicht 20g

MR33 Flat Sensor Wire 125MM

Platte en flexibele MR33-sensorkabel voor het aansluiten van snelheidsregelaar en borstelloze motor.

 Selecteer gewoon de gewenste kabel in het vervolgkeuzemenu!

Verkrijgbaar in de volgende versies:

50 mm (MR33-FSW50)

75 mm (MR33-FSW75)

100mm (MR33-FSW100)

125mm (MR33-FSW125)

150mm (MR33-FSW150)
175mm (MR33-FSW175) 180mm (MR33-FSW180)

200mm (MR33-FSW200) 225mm (MR33-FSW225) 275mm (MR33-FSW275)

MR33 Super Flexible Sensor Cable 125MM

Superflexibele en ronde MR33-sensorkabel voor het aansluiten van snelheidsregelaar en borstelloze motor.

 Selecteer gewoon de gewenste kabel in het vervolgkeuzemenu!

Verkrijgbaar in de volgende versies:

75 mm (MR33-SFS75)

100 mm (MR33-SFS100)

125 mm (MR33-SFS125)

150mm (MR33-SFS150)

175 mm (MR33-SFS175) 180 mm (MR33-SFS180)

200mm (MR33-SFS200) 225mm (MR33-SFS225) 275mm (MR33-SFS275)

Xray Composite Steering Block For Carbon Extension Plate - Graphite

Xray Composite Steering Block For Carbon Extension Plate - Medium

Xray Alu Lower Susp. Holder For Hs Bulkhead - Wide - Front-front

Xray Alu Lower Susp. Holder For Hs Bulkhead - Wide - Front-rear

Xray Carbon Shock Tower For Hs Bulkhead - 2-dots - Front

Xray Anti-roll Bar - Short - 2.0mm

Xray Adjustable Turnbuckle 50mm M3.5 L/r - Hudy Spring Steel™ (2)

Xray Carbon Shock Tower For Hs Bulkhead - 3-dots - Rear

Xray Xb4 Alu Chassis 2.0mm For Low Profile Bumper - Swiss 7075 T6

Xray Composite Front Bumper Aligned With Chassis