• 4WD all-wheel drive
• 2.4GHz remote control
• Extremely durable composite plastic parts
• Fully adjustable suspension
• Ball bearing drive
• Adjustable 16mm Big Bore shocks
• Steel differential outputs
• 5mm aluminum motor mount
• 5mm aluminum shock towers
• Aluminum driveshaft
• 2 cone differentials (front/rear)
• LED light bar front and rear
• Extremely detailed body with add-on parts
• Vehicle can be powered by 2-cell LiPo batteries (up to 30C)
• Scale: 1:10
• Dimensions (L/W/H): 500x270x165 mm
• Weight: 2060g
• Wheelbase: 290mm
• Ground clearance: approx. 45mm
• Track width: 215mm front / 210mm rear
• Tires front/rear Ø: 110mm / Width: 45mm
• Damper oil: 400CPS
• Damper installation length: 80mm
• Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
• Dessert Buggy "ADB1.4" Brushed Version
• 2.4GHz Remote Control CR2SV2
• Mini tool kit
• Instruction manual

• 4WD all-wheel drive
• 2.4GHz remote control
• Extremely durable composite plastic parts
• Fully adjustable suspension
• Ball bearing drive
• Adjustable 16mm Big Bore shocks
• Steel differential outputs
• 5mm aluminum motor mount
• 5mm aluminum shock towers
• Aluminum driveshaft
• 2 cone differentials (front/rear)
• LED light bar front and rear
• Extremely detailed body with add-on parts
• Vehicle can be powered by 2-cell LiPo batteries (up to 30C)      
• Scale: 1:10
• Dimensions (L/W/H): 500x270x165 mm
• Weight: 2060g
• Wheelbase: 290mm
• Ground clearance: approx. 45mm
• Track width: 215mm front / 210mm rear
• Tires front/rear Ø: 110mm / Width: 45mm
• Damper oil: 400CPS
• Damper installation length: 80mm
• Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
• Dessert Buggy "ADB1.4" Brushed Version
• 2.4GHz Remote Control CR2SV2
• Mini tool kit
• Instruction manual

Battery rubber sheet has a heavy center of gravity when heavy batteries are installed in the machine.

So it tends to be a bad driving feel.

Axon Clear Protection Sheet is „Thickness 0.1mm“ so it can be mounted low on the battery, it is a NEW item that can suppress machine roll.

And since this sheet flexibility, it does not obstruct chassis roll at all, it realizes low center of gravity, very natural machine feel.

Specifications:

Yokomo Body Mount Patch 6mm (8pcs)

Main features:

• Ultra Response Mode (SUR) New Transmitter system "FH5" makes new record of the World Fastest Response.
• Color Display and Touch Panel are easy to control.
• Light weight (about 510g) and high rigidity than M12S
• Steering and Throttle Position Optimization and Steering Swing Adjust Function
• Detachable Throttle Unit is available to change spring by drivers (World First)

Product description:

• Installed "Fine Color Display (480x320)
• Touch Pad can be smooth & quick to set
• Installed Detachable Throttle Unit is available to change spring by drivers
• Steering and Throttle position can be optimized without off set bracket. Improved Steering Unit can be increased case strength during operation
• Improved Steering Unit is available to be steering swing adjustment
• Battery recharge port is installed and battery can be check when recharging
• Compatible with Micro SDHC Card is available to manage firmware update, model data, and Telemetry Log
• Installed Multi-Setting Function is available to set PGS servos to connect with transmitter
• Compatible with SSL CODE10 and CODE5 function is available to set PGS servos and SUPER VORTEX Gen2 PRO without any connection
• Installed tilt carrying handle can be holding and easy to put in the box
• Steering Unit can change position for lefty
• Detachable Strap Hook is placed on ideal position for drivers
• Succeeded Full Adjustable Trigger can be fittable for individual
• Optional Large Steering Wheel in package is available to be fine operation
• Available to customize by grip pad, brake trigger, angle spacer, and variable spring in package
• Installed Screen Reader Function is available to sound Lap Time and Telemetry Data and installed headphone jack can be used
• Quick and easy to set as model data and other setting by Quick Set Up Wizard

System features:

• Dull-dot Color LCD(480ｘ320)
• Switchable driving position(Left/Right)
• Touch Pad
• Built-in Antenna
• ST,TH Adjuster
• Detachable Fully Adjustable Throttle Unit
• Feeling
• Safety Link
• Racing Mode
• Setup Wizard
• Dual Rate
• End Pint Adjust
• Anti-Lock Brake
• Servo Speed
• Offset
• Trim/Sub Trim
• Servo Reverse
• Curve
• Fail Safe
• Timer
• Lap
• CODE AUX
• Model Memory
• Model Name
• Model (Select/Copy/Clear/Sort)
• Direct Model Select
• RF Mode (FH5,FH4,FH3)
• Response Mode (SUR/SSR/SHR/NOR)
• Bind
• Log(REC/RPM/VOLT/TLM1/TLM2/ST Point/TH Point/RX Mode/Reading Function)
• Servo Monitor
• Key Assign
• Vibrator
• AUX Type
• Trim Type
• TH Type
• Calibration
• Custom Menu
• Mechanical Rudder Angle Adjustment
• Large Steering Wheel included
• Large/Small Grip Pad included
• Compatible RX: Telemetry-compatible(RX-491, RX-482, RX-472, RX-47T, RX-462, RX-461) , Non-Telemetry-Compatible(RX-481,RX-481WP, RX-471 Dual ID, RX-471W, RX-451R, RX-451, RX-381,RX-480)

RX-493 receiver:

• Compatible with FH5/FH5U (M17)
• Compatible with SXR Response Mode
• COAXIAL ANTENNA with Antenna Pipe Bring More Stable Working in Any Situation
• Voltage: 4.8 - 7.4 V and Water Proof (as IPX4)
• Compatible with SSL Function

Set van 5 naalden voor bv banden lijmen 

Naald flesje voor div gebruik.
olie bestendig 

Use of the Liquid Mask
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
- incredible time savings, the drawing up of liquid is really fast
- possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
- less usury of the cutting blade of your precision cutter
- greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
- no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
- greater accuracy of airbrushing, with our liquid the color smear are no longer a problem

Product Features
- the Liquid Mask is is ready to use, you not need to dilute it
- it is water-based withour solvent, not harmful to health. You can safely use it even at home
- dries quickly when subjected to a jet of hot air
- once the package is opened, if stored properly it can last for several months
- with the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities

Use of the Liquid Mask
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
- incredible time savings, the drawing up of liquid is really fast
- possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
- less usury of the cutting blade of your precision cutter
- greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
- no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
- greater accuracy of airbrushing, with our liquid the color smear are no longer a problem

Product Features
- the Liquid Mask is is ready to use, you not need to dilute it
- it is water-based withour solvent, not harmful to health. You can safely use it even at home
- dries quickly when subjected to a jet of hot air
- once the package is opened, if stored properly it can last for several months
- with the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities

Bittydesign White Plastic Helmet Type-C (universal)

With Vigor´s new Carbon Tweak Rod it is very easy to tighten up your topdeck without any tweak in your mid motor touring car. The rod has as an opening for the spur gear just in the right spot and fits on all common mid motor touring cars on the market right now!

1/10 RC Novafox

This is an updated R/C model of the original FOX off- road buggy originally released in 1985. The 2013 edition is named Novafox. The R/C model retains the dust and dirt resistance features of the original while employing dog-bone type rear drive-shafts to provide the vehicle enhanced reliability.

Specification

- Scale : 1/10
- Construction type : assembly kit
- Terrain use : off-road
- Drive-train : 2WD
- Drive type : gearbox
- Drive line : dog bone
- Differential type : gear
- Suspension : fully independent double wishbone
- Steering mechanism : direct servo
- Shock damper : oil-filled damper
- Shock damper material : plastic
- Tire type : rubber
- Tire tread : grooved front/pin spike rear
- Body material : Polycarbonate
- Chassis material : plastic
- Electronic Speed Control (ESC) : included
- ESC model : TEU-105BK
- LED Light buckets : no
- LED lights : no
- Motor : 540-brushed type
- Bearings : plastic bushing
- Adjustable camber : fixed
- Adjustable toe angles : front only
- Adjustable ground clearance : fixed
- Adjustable gear ratio : fixed
- Adjustable wheelbase : fixed
- Adjustable track width : fixed
- Adjustable shock angle : fixed
- Special feature 1 : Length: 425mm, Width: 225mm, Height: 133mm.
- Special feature 2 : Durable ABS resin monocoque frame.
- Special feature 3 : Features dual CVA dampers at the rear and 1 horizontally-placed CVA damper at the front.
- Special feature 4 : Gold- colored metal-plated wheels.
- Requires A : 2-channel radio gear
- Requires B : 7.2 battery & charger
- Requires C : polycarbonate paint

Tamiya nummer: 58577

MMC speed lager olie 

MMC-zijkniptang

MMC-SREVOHORN-25T OFFSET
VOOR BV POWER-HD SERVO'S

MMC Balance Weight
TOTAAL 60 GRAM DELEN PER 5 GRAM

Traditionally chemicals such as brake cleaner and nasty petroleum based solutions have been used to clean and additive tires. This is harmful to the environment and most importantly to the human body. Throughout our 15+ years of racing, we have seen more health issues from the use of these dangerous chemicals than we care to admit. These health issues can be caused by inhalation of the chemicals, or physical skin exposure which is then absorbed into the blood stream.

This was our motivation to develop a range of tire cleaners and additives that are safe to use, not harming your body, or the environment. The first of which... Dominate!

We are quite aware that most racers won't sacrifice lap-times for the sake of their health, and thats why we have conducted extensive testing to ensure that Dominate out performs every other cleaner on the market! Not only is it safe to use, it's also fast!

Our Dominate Tire Cleaner has been developed by a dedicated local Australian Racer over the past 12+ months. Developed with the aid of several top drivers and certified chemists, we were able to discover an environmentally friendly non-toxic way of softening and conditioning rubber without drying it out, like you've never seen before! Opening up the pores of the rubber is crucial to the absorption of the tire additive and thus its effectiveness of creating more traction and reducing "drop off" over a run.

Dominate is supplied in a pump spray bottle for easy application on both onroad and offroad rubber tires. Simply spray onto a rag or towel and firmly wipe the tire with the cleaner. Allow to sit for at least 1 minute until sticky, before applying the tire additive. Dominate's cleaning capability can be even further increased when tires are cleaned at higher RPM on a tire sander.

Dominate can be used with both new and old tires, and provides a brilliant base for maximum absorption end effectiveness of the tire additive.

If you run out - just grab a Dominate Refill pouch here! Save the environment and your pocket.

Try some today - Help your body, the environment and your lap-times!

Features:

• Environmentally Friendly - Biodegradable and non-toxic
• Much safer for daily use on the body
• Fresh eucalyptus "green" odour
• Softens and restores rubber tires, without drying them out
• Extremely effective on Rubber tires in Onroad & Drag, as well as Offroad
• Improves absorption of additives and compounds added to the tire after cleaning
• Comes in a blacked out 100mL spray bottle with cap
• MSDS Available

Introducing from CORE RC these nice quality, nice looking tools with a nice price!

Set of four, 1.5, 2.0, 2.5,3.0mm in attractive plastic case.

Features:

• Premium Black and Gold Colouring. 
• Quick glance, circular etched lines to indicate tool size, along with regular dimension size etching. 
• Over sized, ribbed 20mm handle, for good grip and size. 
• Titanium coated hardened tips. 

With the Matrix 36R tires you will get a high performance race tire with a solid lifespan and a great value for the price. During testing the Matrix tires had a very balanced character and it seems they are perfect for high level and club racing. The Matrix 36R is the handout tire for the world famous ETS series. They are available on ETS marked white dish wheels and realistic looking grey spoke rims.

ETS Tire selection:
The ETS Modified and ETS 13.5T ProStock class will use the tires on the white dish wheels (MX-EPA036).
In the ETS 17.5T Stock and ETS 40+ Masters class the tires will be mounted on the grey spoke wheels (MX-EPA036-SP).

Ride 1:10 M-Chassis High Grip Tires MT30R (Mid-Low Temp.) (2)INCL INNER FOAM

Ride 1:10 M-Chassis High Grip Tires MT33R (Mid Temp.) (2)INCL INNER FOAM

Ride 1:10 M-Chassis High Grip Tires MT36R (Hi-Mid Temp.) (2) incl inner foam.

Ride 1:10 M-Chassis 60 Size 10-Spoke Wheel - Black (2)

Ride 1:10 M-Chassis 60 Size 10-Spoke Wheel - White (2)

The world’s smallest transponder now in a pitch-black design helping you race in style. This device is compatible with all MYLAPS RC4 timing systems (with all firmware versions).

Detail

Our RC transponders help you to track lap times and give better insights in your performance.
You install the transponder in your RC car. If you race with multiple RC cars it’s convenient to install a transponder in every car. A transponder has a seven-digit number.

Features:

• The RC4 Pro transponder is 25% smaller than the RC4
• A shorter 8cm cable ensures a perfect fit every time
• It weighs only 3 grams
• All your results in your personal profile.
• RC4 transponders can be used for both indoor and outdoor racing and will perform on just about any surface.
• Compatible with MYLAPS RC4 timing systems.

Specifications:

Mighty Gripper Additives Comparison Chart:

Tamiya 58336 The Hornet 2004

Beperkte heruitgave

Heruitgave van de legendarische 2WD buggy The Hornet uit 1984. De Hornet is geen topmodel voor TAMIYA-verzamelaars, maar ook voor alle fans van buggy's.

levering:
Kit incl. Elektronische aandrijfregelaar TEU-101BK evenals gedetailleerde en geïllustreerde instructies
Technische details:

· 2WD achterwielaandrijving
· Wrijvingsdemper
· Speldbevestigde banden op de achterste en voorste groefbanden
· Gesloten versnellingsbak
· Badkuipchassis met zijverstuivingsbalken
· Polycarbonaat body · driver figuur

Technische specificaties:

Lengte: 400 mm
Breedte: 230 mm
Gewicht: 874 g
Schaal: 1:10
Motor: Type 540 elektrische motor
Type aandrijving: achterwielaandrijving

Tamiya nummer: 58336

• A nice and clean tool bag to cover and carry your tools
• Extra hardened "Spring Steel" tool tips
• Synthetic handle for a ergonomic grip
• Colored caps for an easy iddentification

• Hex Driver 1.5mm
• Hex Driver 2.0mm
• Hex Driver 2.5mm
• Hex Driver 3.0mm
• Phillips Screwdriver 3.0mm
• Phillips Screwdriver 5.0mm
• Flat Screwdriver 4.0mm
• Nut Driver 4.0mm
• Nut Driver 5.5mm
• Nut Driver 7.0mm

• Round Head Hex Driver
• Arm Reamer
• Caster Clip Remover
• Thread Taps

Xerun Justock Combo G3 and 17.5 Turn 2450kV for 1:10 Stock

Xerun XR10 Justock G3 Brushless ESC 60A, 2s-3 LiPo, BEC 3A

Model: SKY600064-08

Fabrikant: SkyRC

The latest Tire Warmer with warming belt makes the heating more evenly, gives better heat preservation. Preheating the rubber tire surface increases the rubber's friction coefficient and enhances its grip on the track surface. Racing for RC hobbyists is made easy! SkyRC Tire Warmer will definitely give you the advantage of tire-readiness whenever you roll out onto the track.
Specificaties

• Dual power source: 4S LiPo battery pack or 12-18V DC input
• Temperature controlled by MCU
• Celsius/Fahrenheit switchable
• Set temperature independently at the front and rear
• Safety timer
• Intuitive user interface

Model: MOF949

Fabrikant: Muc-Off

Muc-Off Dry PTFE Chain Lube is a highly versatile, dry weather chain lube. Our advanced ‘Dry Formula’ creates a clean, durable and protective chain wax layer that inhibits rust development and chain link corrosion. The added PTFE creates exceptionally low surface friction .

ROBR14002Transport Bag 1/10
Kunstof bakken.

Dimensions :

Whole bag : 550x500x260mm

Main Tray : 510x135x240mm

Additional Trays : 250x130x340mm

Konect Aluminium 30mm High Speed Cooling Fan (BEC connector)

1up Racing Pro Wire Clamp - 12/14 Gauge 3 Wire

Muchmore Aluminum Body Repair Tape (50x2000mm)

The double sided tape which is widely regarded as the best type of tape in the industry, is now available in easy to use pads. Easily adheres electrics to chassis, this clear tape is now available in 25 x 20mm pads, 1 piece is perfect for most speed controls or receivers, with no waste.

Sticks extremely well and peels off in one piece with no residue.

25 x 20mm, 24 per pack. Approx. 1mm thick.

Optional LiPo battery for the SANWA M17 radio. 6000mah compared to the standard 2500mah supplied in the radio.

Specifications:

Tamiya Comfort Fit Mask grey XL

- Choose from two types of colors (black and gray). Each features a complementary gray Tamiya logo.
- Three-dimensional shape and stretchy material provide a comfotable fit.
- Can be washed about twenty times.
- This mask not only blocks UV rays, but also features the antimicrobial and deodrant finish which helps you keep the masks clean and fresh.
- Compliant with American and European inspection standards.
- Materials: polyester (92%) and polyurethane (8%).

Includes 1 pc.

Tamiya nummer: 67480

Tamiya Comfort Fit Mask Black XL

- Choose from two types of colors (black and gray). Each features a complementary gray Tamiya logo.
- Three-dimensional shape and stretchy material provide a comfotable fit.
- Can be washed about twenty times.
- This mask not only blocks UV rays, but also features the antimicrobial and deodrant finish which helps you keep the masks clean and fresh.
- Compliant with American and European inspection standards.
- Materials: polyester (92%) and polyurethane (8%).

Includes 1 pc.

Tamiya nummer: 67479

TA08 PRO Titan/Alum Hex Socket Screw Set

Motip remmenreiniger spuitbus

Deze uitstekende Motip Remmenreiniger beschikt over een hoog oplossend vermogen.Hierdoor wordt nagenoeg elk vuiltje van je remmen verwijderd. Ook laat de Motip Remmenreiniger geen enkele residu achter. Dat wil zeggen dat de remmenreiniger ervoor zorgt er geen enkele onzuiverheden op de remmen achterblijven. Daarbij is dit product niet bijtend en ontstaat er geen schade aan je remmen. Bovendien beschikt deze remreiniger over een niet geleidende eigenschappen.

Specificaties:
Inhoud: 500 ml
Gewicht: 442 gram

Now you can take temperature measurement at a safe distance with SkyRC. RC hobbyists will never get burned or air blowing in your face from the RC vehicles, engines, motors, chargers, etc., while taking measurements.
You can trust SkyRC  to get accurate temperature readings from a safe distance, wherever indoor or outdoor.
SkyRC has engineered the ITP380 temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

SkyRC Black Maintenance Stand for 1/10 Touring, 1/12 Racing

Introducing from Contact RC Tyres, the A34 pre-glued rubber tyre especially designed for outdoor 1/10th Touring racing.

A great performing tyre with a sensible price.

The Contact A34 pre-glued tyre has been developed and tested by Schumacher's highly experienced staff to provide excellent traction and wear rates for competition touring car racing.

The A34 is built on a Schumacher Revlite 24mm wheel combined with a medium yellow insert, a well proven combination over many years.

The tyre has a wide working temperature from 10 to 30 deg Celsius air temperature.

 Glued using Schumacher's in house automated gluing process which accurately controls the glue flow rate and quantity to ensure perfectly glued tyres every time.

Gens Ace Redline V2 Series 2S 130C 5800mAh Hardcase LiPo Battery Pack. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 130C 2S 5800mAh 7.6V LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect.

Features:

• Stable automatic stacking technology enables single cell capacities of 5800mAh.
• The most strict single cell capacity, voltage, resistance, discharge curve matching process.
• Superior Japan and Korea Lithium Polymer raw materials.
• Standard ∮5.0mm bullet

Specifications:

Classic Sanwa radio carrying bag for different types of radios. Protect your radio in style while traveling or during long racing weekends!

Features:

• Shoulder strap is included
• From shifting a partition according to contained item, wheeler or stick radio or other items can be contained
• Increase of width, 10 mm compared with Multi-Bag
• Color is changed from black to red at the fastener area
• Dimensions (external): 320 x 260 x 150 mm

Sanwa RX-492 (FH5/FH5U, SXR Response) Waterproof Telemetry Receiver w/Internal Antenna

1/10 RC Super Clod Buster (2012)

The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980's, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin- motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.

Specs and Features
1/10 scale R/C assembly kit.
The Super Clod Buster body has been reproduced in injection-molded plastic.
Highly-durable bathtub type monocoque chassis frame.
Front/rear trailing arm suspension with 8 coil spring dampers.
Front/rear sealed gearboxes are equipped with differential gears.
Kit includes TEU-103BK ESC. (Original kit included a mechanical speed controller)
Two 540 motors included.
Sticker sheet included.

Tamiya nummer: 58518

EAN: 4950344585182