Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!

Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!

Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!

Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!

Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!

Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!

Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!

Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!

FLOW-MAX2™ OPTIMIZED COOLING DESIGN
FLOW-MAX2™ Air hole designed maximum cooling through various tests. 

RPM LIMIT BLINKY MODE
FLETA EURO V2 ESC has RPM Limit mode functions. 
Using the RPM Limit mode, ESC control the limit RPM when your driving. This mode more fair control stock race. This function operate "Blinky V3.0_25RE2" firmware, Easy setup change of Normal Blinky mode and RPM limit Blinky mode with out firmware update . 
FLETA EURO V2 is the black translucent case, so you can easily check the mode.

DIRECT MOTOR & ESC COOLING FAN POWER
Battery power directly supply to the cooling fan, be able to do more high RPM cooling to ESC, Motor. ESC had separate motor cooling fan port, no needs soldering for the motor cooling fan wire.

- Optional Part-
MR-TU25FAN Turbo Cooling Fan 25x25x10mm 
MR-TU30FAN Turbo Cooling Fan 30x30x10mm
MR-TU40FAN Turbo Cooling Fan 40x40x10mm 

FELTA EURO V2 ESC Cooling fan is directly connected to the battery. However, if ESC turns off, the cooling fan will operate even. So battery voltage may drop if left unattended for a long time.

INTERNAL SWITCH SYSTEM
FLETA EURO V2's internal switch makes the wiring convenient.
- Power On/Off
- Calibration Setup
- RPM Limit Blinky mode <> Normal Blinky mode 

If you want to change Blinky mode, With the power on Press setup button successively 3 times . 
You can check which Blinky mode with LED status.

Normal Blinky mode: Green Fast Flashing
RPM Limit Blinky mode: Green Flashing twice and Red flash once

COMPACT & LIGHTWEIGHT DESIGN
FLETA EURO V2's compact & lightweight design, will make variety layout and spacious space on chassis. more easy adjusting the chassis balance.
Included 20x20mm ESC Cooling Fan and Motor connectors Female 3pcs, Male 3pcs

Current Continuous Continuous 80A / Peak 380A Input 2S LiPo, 2S LiFe, 5-7 cell NiMh/NiCd BEC Output Switch Mode 6V/7.4V @3A Suppoerted Motor Type 540 size 2 pole brushless with sensor type Suitable Motor Over 9.5T Size 26.5 x 32.7 x 17mm Weight 21.5g (without Wire, Capacitor and Cooling fan)

Muchmore Racing research and development team succeeded to make a brand new motor that guarantees maximum power and efficiency.
Flow-Max 2 Cooling System is produced by simple 2-piece CNC processing that allows superior cooling effect.
We were able to enhance the cooling efficiency by 15% in comparison to our past motor products which is great achievement in terms of keeping the motor performance as high as possible.
In addition, the High Power New Stator Design approach doesn’t use separate insulator.
Therefore, less weight and maximum cooling efficiency achieved.
All FLETA ZX V2 motor incorporates “Maximum Low Resistance Copper Wire” that allows low internal resistance which results in maximum output power increase.
The motor uses Heavy-duty silver-plate solder tabs which reduce resistance.
Also, it uses the double eyelet to prevent fatiguing over time.
The stator design achieves very low internal resistance in exchange for surprisingly high output power.
Improved ease of maintenance and loss of weight is additional features achieved by NEW V2 design.

All new FLETA ZX V2 motor promises maximum power output and RPM achieved by Pure copper magnetic wire
and Low resistance collector rings.
MIXED TIMING Version of new FLETA ZX V2 Brushless motor is now available.
FLETA ZX V2 Fixed Timing Brushless motor is consistent with the rules of the ETS, many national championships, club races.
All new stator design offers smooth acceleration both on- and off-road racings.
Our recently upgraded manufacturing capability has achieved “precision balanced neodymium high-temperature rotor” which shows enhanced performance.
Also, special setup program and optional rotors make various kinds of tune-ups possible according to drivers’ choices.

Muchmore LED Pit Light Stand 3

Muchmore Racing LED PIT LIGHT STAND 3 Release!

Adopt high performance LED light and components, lighting more concentrated. Tube design, easy to get the best lightning angle.

Low energy consumption design, saving 90% than incandescent lap. It does not contain the tungsten, mercury and other toxic metal. environmental friendly.

High sensitivity touch panel, elegant control experience.  It operates as a touch panel on the main body.  As a result, it has been developed to be slimmer than the existing LED Stand 2 products.
WIRELESS CHARGER SYSTEM Wireless charging system is built in. When you place a device that supports wireless charging.
ADJUSTABLE SWING ARM Lighting arm swing angle is adjustable to meet your lighting demands. Lighting arm swing angle range: 60 deg of each.
USB CHARGE PORT LED PIT LIGHT STAND 3 is built in charging port. (5V USB output, can charge smart phone and etc).
5 COLOR TEMPERATURE ADJUSTABLE Click the M button to change the color temperature. (2800k, 3400k, 4500k, 5600k, 6500k LED)
INCLUDED POWER INPUT CABLE USB Type A to USB Type C

Specifications:

482R Receiver for Sanwa

Robuuste en bijna onverwoestbare NiMH Stick Pack Battery. Deze accu is snel oplaadbaar en heeft een 100 mm 14AWG-draad met T-connector. Ook wordt het geleverd met een 40mm lengte Tamiya Adapter. Met deze configuratie biedt het pakket voor bijna elke toepassing of doel de juiste verbinding. Het maakt niet uit of voor de meest standaard modellen de Tamiya-stekker of de krachtige T-Connection wordt gebruikt.

Technische specificaties:

Model No.: NXEC6700/100-2S1P-HV-GR 
Typical capacity : 6700mAh
Typical Voltage: 7.6V
Dimensions: 25.1*46.5*138.0mm
Approx Weight: 274.0g
Hard Case: Black
Plug: Banana Plug and T-Plug
Continuous Discharge Current: 100C
Burst Discharge Current: 200C
Charge Rate: 1-3C Recommended, 5C Max
 
RC Lipo Battery Pack Built with the highest quality single cells Engineered and optimized specifically for RC planes and RC cars unmatched energy and power density Increased flight time (about twice that of comparable NiMH packs) Significantly decreased weight compared to NiMH or NiC packs Smaller physical size to easily fit in your RC aircraft No memory effect The ability to supply current at high rate.
 
Product Advantages:
    (1) Adopt the world's key material-LiCo02.
    (2) Fully automatic lamination machine with Nano Tech.
    (3) Laminated structure, Nano Coat Technology. Advanced Nano ultrasonic welding electrode.
    (4) Industry most stringent single cell capacity, voltage, resistance and discharge curve (competition level) matching process.
    (5) Strong safety performance and extremely low self-discharge.
    (6) Long cycle life, chargeable up to 300 to 500 times.
    (7) No memory effect, high discharge and charge current.
    (8) No mercury, No fire, No explosion, No leakage.
    (9) Quite good and quick charge, capability can be charged to 90% within 10 mins.
    (10) Thickness can be adjusted while width and height keep the same.
    (11) Light weight and low IR, packed with punch and ready to race.
    (12) Good storage performance, Green & Environmental protection without any pollution.
    (13) Idea for 1/10 and 1/8 buggy racing and hard case increase safety of the battery.
 
Tag: 6700mAh rc car lipo battery, 2S rc car battery, 7.6V rc car lipo battery pack, rc car lipo battery, rc battery packs, best lipo battery for rc car

ORCA Blitreme2 13.5T Brushless Motor (ETS APPROVED)

ORCA BP1001 Blinky Pro Brushless Speed Controller (ETS 17.5T approved)

Deze ORCA BP1001 Blinky Pro ESC wordt geleverd met de juiste software (V1.4) voor de ETS klassen Orca 17.5 Stock en ToniSport 40+ Masters.

Natuurlijk kan de software ook worden gebruikt met de Orca-programmeerkaart (OR-P19OE1CARD), en gebruik de controller in de ETS-klasse Awesomatix Pro Stock 13.5T en in de Blinky raceseries. 
sofware is ook bij ons om te zetten na wens.

Alle software kan hier worden gedownload (zie de doeload sectie hieronder)!

Instelmogelijkheden:

1. Lopende modus

2. Batterij uitschakelspanning

3. Punch

4. PWM-frequentie

5. Dragbrake

6. Max. Remkracht

7. Rem Pons

8. Rem PWM Frequentie

9. Max. Omgekeerde Kracht

10. Neutraal Bereik

11. Motor Link

Kenmerken:

• ETS lasergravure voor eenvoudige identificatie
• Gewicht: 20.8g
• Afmetingen: 30.5 x 30.4 x 10.4mm
• Ingangsspanning: 6-11V
• Ononderbroken stroombelasting: 100A
• Kortstondige stroombelasting: 380A
• Limiet motor: 10.5T
• BEC: 4A 6V/7.2

De ORCA Blinky Pro is een snelheidsregelaar die speciaal is ontwikkeld voor de Euro Touring Series en Blinky klassen

Hij biedt de gebruikelijke ORCA-kwaliteit en rijeigenschappen

Het belangrijkste verschil is dat er geen boost of turbo timing functies zijn, dus de ESC is altijd in blinky mode

U kunt echter nog steeds enkele belangrijke parameters voor het rem- en "gasvinger"-gevoel aanpassen.

ORCA BP1001 Blinky Pro Brushless Speed Controller (ETS 21.5T Stock approved)
Deze ORCA BP1001 Blinky Pro controller wordt geleverd met de juiste software voor de ETS klasse 21.5T en 40+ Masters.

Natuurlijk kunt u de software ook aanpassen met de Orca-programmeerkaart (OR-P19OE1CARD), en de controller gebruiken in de ETS klasse ProStock, alsook in Blinky racing series. 

Alle software is hier te downloaden (zie doeload sectie hieronder)!

 

De ORCA Blinky Pro is een snelheidsregelaar die speciaal is ontwikkeld voor de Euro Touring Series en Blinky klassen.

Hij biedt de gebruikelijke ORCA kwaliteit en rijeigenschappen.

Het belangrijkste verschil is dat er geen boost of turbo timing functies zijn, dus de ESC staat altijd in blinky mode.

U kunt echter nog steeds enkele belangrijke parameters instellen voor het rem- en "gasvinger"-gevoel.
Instelmogelijkheden:

1. Running Mode

2. Batterij afsluitspanning

3. Punch

4. PWM-frequentie

5. Sleeprem

6. Max. Remkracht

7. Rem Punch

8. Rem PWM Frequentie

9. Max. Achteruitkracht

10. Neutraal bereik

11. Motorverbinding

 

Kenmerken:

ETS-lasergravure voor gemakkelijke identificatie
Gewicht: 20.8g
Afmetingen: 30.5 x 30.4 x 10.4mm
Ingangsspanning: 6-11V
Ononderbroken huidige lading: 100A
Kortstondige huidige lading: 380A
Motorgrens: 10.5T
BEC: 4A 6V/7.2
Technische specificatie
ETS Goedgekeurd:    ETS 40+ Masters / 21.5 Stock, Ja

ORCA ESC BEC cable 100mm JR to JR

ORCA ESC switch w/cable

ORCA Non Polar Capacitor 1700uF 16V

ORCA Non-polarity noise killer 10V

The ORCA Totem brushless esc is ORCA's latest stock spec Speed controller. It features a continous current rate of 100A, which is enough of up to 10.5T motors while using the included fan mounted on top of the esc. The 23.5g light Totem esc comes with reverse polarity protection and integrated capacitors for a even smaller footprint.

Technical Specifications:

Dimensions: 23.8x33.6x17.6mm

Weight: 23.5g

Voltage Input: 6-8.7V

Peak Current: 380A

Continous Current: 100A

Motor Limit: Over 10.5T

Motor Type: Sensored 540 sized brushless motors

BEC: 4A | 6V-7V

Multi Protection System: Yes

Accessories:

• ORCA OE1 Program Card
• ORCA INFINITE Batteries
• ORCA Blitreme2 Stock Brushless Motors
• ORCA Modtreme Modified Brushless Motors

ORCA Program Card

2S Lipo charge lead with 4mm charger input plugs and 4mm battery plugs, including 2mm balance plug 450mm. Extremely versatile, suits a wide range of chargers!

2S Lipo charge lead with 4mm charger input plugs and 5mm battery plugs, including 2mm balance plug 450mm. Extremely versatile, suits a wide range of chargers!

Orion Charging Cable BEC,22AWG 60cm

Orion Charging Cable Futaba/Universal,22AWG 60cm - ORI40025

Orion Charging Cable Super Plug (Deans),16AWG 30cm

Orion Charging Cable Tamiya,16AWG 30cm

Orion Charging Cable TRX,16AWG 30cm

Orion Charging Cable XT60,16AWG 30cm

PERFTEC Bullet PLUG 4.0mm Gold-Plated (2)

PERFTEC Bullet PLUG 5.0mm Gold-Plated (2)

It features an all-aluminium case and distinctive laser pattern on the bottom, durable titanium and steel gears, a powerful coreless motor and it pulls up to 12.5kg-cm of torque at a speed of 0.059s, weighs only 55g, support SSR mode.

With receiver wire leaving the case on the opposite side of the output gear–and thus on the inside of the chassis in most cases – wiring can be carried out much neater compared to standard servos that always have the wire on the “outside” of the chassis. Therefore the servo is the ideal choice especially for 1/10th touring cars and drift cars, as it make for more tidy and safer wiring.

Specifications:

Torque(6.0V): 13.5 kg-cm ( 187.5 oz/in)
(7.4V): 16.5 kg-cm ( 229.1 oz/in)
(8.4V): 18.0 kg-cm ( 250.0 oz/in)Speed0.10 sec (6.0V)
0.095 sec (7.4V)
0.085 sec (8.4V)Operating Voltage6.0 ~ 8.4 DC VoltsWeight55.0 g (1.94 oz)Bearing TypeBall Bearing x 2Motor TypeCoreless MotorGear TypeTitanium & SteelOperating Temperature-20℃~60℃Working frequence1520μs / 333hzSize41.0 x 20.0 x 26.3 mm (1.61 x 0.79 x 1.04 in)

Power HD have introduced their budget-friendly new waterproof HV servo LW-25MG.  It makes use of a CNC-machined all-alloy case for improved durability, newly wiring outlet structure for enhanced waterproof function, having 36CM wire to compatible with Traxxas TRX-4 wiring.

It is usable with 6.0V to 8.4V input, offer a torque of up to 25kg-cm at a speed of down to 0.14s.

Specifications:

Specificaties Power HD LW30MG
- Trekkracht 4,8V: 18,0 kg
- Trekkracht 6,0V: 23,5 kg
- Trekkracht 7,2V: 30,0 kg
- Snelheid 4,8V: 0,18 sec.
- Snelheid 6,0V: 0,16 sec
- Snelheid 7,2V: 0,14 sec
- Voltage: 4,8-7,2V
- Gewicht: 62 gram
- Kogellager: 2x
- Motor type: DC motor
- Tandwielen: Koper / Aluminium
- Frequentie: 1520μs/333hz
- Afmetingen: 40,5 x 20,5 x 39,3 mm
- Waterproof

Specificaties Power HD PHD-LW-13MG
- Trekkracht 4,8V: 10,5 kg-cm
- Trekkracht 6,6V: 13,0 kg-cm
- Snelheid 4,8V: 0,15 sec.
- Snelheid 6,6V: 0,12 sec
- Voltage: 4,8-6,6V
- Gewicht: 60 gr
- Kogellager: 2x
- Motor type: DC motor
- Tandwielen: Koper / Aluminium
- Frequentie: 1520μs/333hz
- Afmetingen: 40,7 x 20,5 x 39,5 mm
- Waterproof

Power HD M8 1:12 Pan Car Servo

De Power HD M8 is een topklasse servo geoptimaliseerd voor 1:12 racen. 
Hij kan worden gebruikt met alle gangbare transmissiemodi (SSR, SUR, SXR, SR, en SFR.)

De servo zorgt voor een precieze besturing van uw 1:12 pan auto.

Kenmerken: 

• Vermogen (4,8V): 4,3 kg-cm 
• Aandrijfkracht (6,0 V): 6,3 kg-cm
• Aandrijfkracht (7,4V): 7,6 kg-cm  
• Aandrijfkracht (8,4V): 8,5 kg-cm 
• Snelheid: 0,10 sec (4,8V) │ 0,079 sec (6,0V)
• Snelheid: 0,068 sec (7,4V) │ 0,058 sec (8,4V)
• Bedrijfsspanning: 4,8 ~ 8,4 gelijkstroom volt
• Gewicht: 28,6 g 
• Motortype: kernloze motor
• Versnellingsbak: titanium en staal
• Afmetingen: 28,5 x 13,4 x 29,0 mm

Power HD M8 Pro 1:12 Pan Car Servo

De Power HD M8 Pro is een topklasse servo geoptimaliseerd voor 1:12 racing met "Direct Mount" functie.
De servo kan worden geïnstalleerd in alle Pan-auto's die sleufgaten hebben voor de servobevestiging in het chassis (zie foto's).

De servo  kan worden gebruikt met alle gangbare transmissiemodi (SSR, SUR, SXR, SR, en SFR.)

De M8 Pro zorgt voor een precieze besturing en een perfect stuurgedrag in uw 1:12 Pan Car.

Kenmerken: 

• Vermogen (4,8V): 4,3 kg-cm 
• Aandrijfkracht (6,0 V): 6,3 kg-cm
• Aandrijfkracht (7,4V): 7,6 kg-cm  
• Aandrijfkracht (8,4V): 8,5 kg-cm 
• Snelheid: 0,10 sec (4,8V) │ 0,079 sec (6,0V)
• Snelheid: 0,068 sec (7,4V) │ 0,058 sec (8,4V)
• Bedrijfsspanning: 4,8 ~ 8,4 gelijkstroom volt
• Gewicht: 28,6 g 
• Motortype: kernloze motor
• Versnellingsbak: titanium en staal
• Afmetingen: 28,5 x 13,4 x 29,0 mm

Power HD M8H 1:12 Pan Car Servo

De Power HD M8H  is een topklasse servo die is geoptimaliseerd voor 1:12 racen.
De servo kan worden geïnstalleerd in alle panwagens die sleufgaten hebben voor de servomontage in het chassis.

De servo  kan worden gebruikt met alle gangbare transmissiemodi (PGC, SSR, SUR, SXR, SR en SFR)

De M8H zorgt voor precieze besturing en nauwkeurige besturing in je 1:12 Pan Car.

Kenmerken: 

• Aandrijfkracht (4,8V): 4,5 kg-cm 
• Aandrijfkracht (6,0V): 6,3 kg-cm
• Bedieningskracht (7.4V): 7.5 kg-cm  
• Bedieningskracht (8,4V): 8,5 kg-cm 
• Snelheid: 0,11 sec (4,8V) │ 0,085 sec (6,0V)
• Snelheid: 0,073 sec (7,4V) │ 0,065 sec (8,4V)
• Bedrijfsspanning: 4,8 ~ 8,4 DC Volt
• Gewicht: 18 g 
• Motortype：Cernloze motor
• Versnellingsbak：Alu
• Afmetingen：27,2 x 12,1 x 28,2 mm
• Servo hoorn: 25Z (niet meegeleverd)

Power HD Multi-function Program Box for S15/S25/S35/S50 and D12/D15 Servos

Specifications:

vos feature all-aluminium housings in a 2-tone anodising that is available with silver, red or gold-colour details while the geartrains are made up using high-quality aluminium and steel gears. Japanese Noble potentiometers ensure highest possible precision and an updated PCB supports SSR and SUR modes. The line includes the S15 low-profile and S25 and S35 standard size servos all of which are usable with 6V to 8.4V input.

Specifications:

Power HD S15-X Servo for XRAY X4

The PowerHD S15 Servo is now available with a “Direct Mount” for the Xray X4 touring car!

This Digital Brushless Low Profile Servo from Power HD with the name “S15” is one of  the most valuable servos on the market right now. It has all you need to drive your racecar to the win. The full machined aluminum case makes it very durable, and the torque and speed of this servo is really outstanding. Check out the features of the S15 to see what it`s all about!

Features of the PowerHD S15 Servo:

·         Power HD S15 Servo with “Direct Mount” for the Xray X4
·         Torque(6.0V): 11.5 kg-cm
·         Torque(7.4V): 15.0 kg-cm
·         Speed: 0.072 sec (6.0V) │ 0.060 sec (7.4V)
·         Operating Voltage：6.0 ~ 8.4 DC Volts
·         Weight: 52.0 g
·         Bearing Type：Ball Bearing x 2
·         Motor Type：Digital Brushless Motor
·         Gear Type：Titan & Aluminum
·         Size：41.0 x 20.0 x 26 mm
·         Receiver wire: 80mm length, black, JR Connector
·         Servohorn: 25 teeht (not included)

Servos feature all-aluminium housings in a 2-tone anodising that is available with silver, red or gold-colour details while the geartrains are made up using high-quality aluminium and steel gears. Japanese Noble potentiometers ensure highest possible precision and an updated PCB supports SSR and SUR modes. The line includes the S15 low-profile and S25 and S35 standard size servos all of which are usable with 6V to 8.4V input.

Specifications:

Specificaties Power HD LF20MG
– Trekkracht 4,8V: 16,5 kg-cm
– Trekkracht 6,6V: 20,0 kg-cm
– Snelheid 4,8V: 0,18 sec
– Snelheid 6,6V: 0,16 sec
– Voltage: 4,8-6,6V
– Gewicht: 60 gr
– Kogellagers: 2
– Motor type: DC motor
– Tandwielen: koper / Aluminium
– Afmetingen: 40,7×20,5×39,5 mm
– Vertanding hevel: 25 tands

PowerHD Black Colour R12S Servo - PHD-R12S

Perfecte servo voor 1/10 Toerwagen 1/10 Buggy M-Chassis of F1 met een prima prijs!

Kenmerken:
Koppel (6,0 V): 9,0 kg-cm (125,0 oz / in) Koppel (7,4 V): 12,0 kg-cm (166,6 oz / in)
Snelheid: 0,07 sec (6,0 V) | 0,06 sec (7,4 V)
Bedrijfsspanning: 6,0 ~ 8,4 DC Volts Gewicht: 41,0 g (1,45 oz)
Type lager: kogellager x 2
Motortype: kernloze motor
Versnellingstype: Titan en aluminium
Bedrijfstemperatuur: -20? ~ 60?
Werkfrequentie: 1520μs / 333hz
Grootte: 41.0 x 20.0 x 26.4 mm (1.61 x 0.79 x 1.04 in)
Servohorn: 25 tands (niet inbegrepen)

PowerHD Coreless High Voltage 1/12 Servo R6 - PHD-R6

Perfect voor 1/12 Auto's zoals XRAY X12, Associated 12R6 etc.

• Torque(6.0V): 6.5 kg-cm (90.26 oz/in)
• Torque(7.4V): 7.5 kg-cm (104.0 oz/in)
• Speed: 0.09 sec (6.0V) │ 0.08 sec (7.4V)
• Operating Voltage：6.0 ~ 8.4 DC Volts
• Weight: 28.5 g (1.01 oz)
• Bearing Type: Ball Bearing x 2
• Motor Type：Coreless Motor
• Gear Type：Copper & Aluminum
• Operating Temperature：-20℃~60℃
• Working frequence：1520μs / 333hz
• Size：35.0 x 15.1 x 29.5 mm ( 1.38 x 0.59 x 1.136 in)

PowerHD GTS-2 6cm cable TW HV 4-pole Brushless Digital Servo 23.0KG/0.065sec

Torque(4.8V): 16.5 kg-cm (229.1 oz/in)
Torque(6.0V): 20.0 kg-cm (277.7 oz/in)
Speed: 0.18 sec (4.8V) │ 0.16 sec (6.6V)
Operating Voltage：4.8 ~ 6.6 DC Volts
Weight: 60 g (2.12 oz)
Bearing Type：Ball Bearing x 2
Motor Type：DC Motor
Gear Type：Copper & Aluminum
Operating Temperature：-20℃~60℃
Working frequence：1520μs / 333hz
Size：40.7 x 20.5 x 39.5 mm ( 1.60 x 0.80 x 1.55 in)

Specificaties Power HD LF-13MG
- Trekkracht 4,8V: 10,5 kg-cm
- Trekkracht 6,6V: 13,0 kg-cm
- Snelheid 4,8V: 0,15 sec.
- Snelheid 6,6V: 0,12 sec
- Voltage: 4,8-6,6V
- Gewicht: 60 gr
- Kogellager: 2x
- Motor type: DC motor
- Tandwielen: Koper / Aluminium
- Frequentie: 1520μs/333hz
- Afmetingen: 40,7 x 20,5 x 39,5 mm

- Trekkracht 4,8V: 3,5 kg-cm
- Trekkracht 6,0V: 4,4 kg-cm
- Snelheid 4,8V: 0,14 sec.
- Snelheid 6,0V: 0,12 sec
- Voltage: 4,8-6,0V
- Gewicht: 43 gr
- Kogellager: 2x
- Motor type: DC motor
- Tandwielen: Kunststof
- Afmetingen: 40,7 x 20,5 x 39,5 mm

This Digital Brushless Low Profile Servo from Power HD with the name “S15” is one of the most valuable servos on the market right now. It has all you need to drive your racecar to the win. The full machined aluminum case makes it very durable and the torque and speed of this servo is really outstanding. For the design of different cars you can choose the S15 with silver, golden or red color accents to look even better in your car! Check out the features of the S15 to see what it`s all about!

Features:

• Torque(6.0V): 11.5 kg-cm
• Torque(7.4V): 15.0 kg-cm
• Speed: 0.072 sec (6.0V) ¦ 0.060 sec (7.4V)
• Operating Voltage:6.0 ~ 8.4 DC Volts
• Weight: 52.0 g
• Bearing Type:Ball
• Bearing x 2
• Motor Type:Digital Brushless Motor
• Gear Type:Titan & Aluminum
• Size:41.0 x 20.0 x 26 mm
• Receiver wire: 80mm length, black, JR Connector
• Servohorn: 25 teeht (not included)