ris ONE Drive Belt 270mm (3pcs | 2.5mm)

Iris Pit Mat (110x50cm

Iris | RUDDOG Pit Mat (110x50cm)

Iris ONE.05 FWD Rear Topdeck

Iris ONE Foam Bumper

Maximize your 1/8 Brushless engine's cooling with the Revolution Design Ultra 1/8 Fan Mount Kit. Specially tailored for engines with a 40mm diameter, this mounting kit offers flexible and efficient adaptation. Compatible with both 30mm and 40mm fans, it grants the liberty to select the fan best suited to your needs. With its sturdy design and straightforward assembly, it's the ideal upgrade to enhance your engine's performance and lifespan.

Features:

• Compatible with 1/8 Brushless engines of 40mm diameter
• Supports both 30mm and 40mm fans for utmost flexibility
• Robust construction ensuring lasting durability
• Easy assembly and dependable Fixation.

The RUDDOG Pit Towel offers a practical alternative or complement to popular pit mats. It is perfect for catching overflowing damper oil and safely holding dropped differential balls or screws that might otherwise be lost in the pit area. Measuring 100 cm x 70 cm, the towel fits perfectly on a standard pit space and can be easily folded if needed. Folded up, it fits even where accommodating a sturdier mat might be challenging.
The pit towel in the classic RUDDOG colors is an attractive option for model builders on a limited budget or as a small gift, thanks to its affordable price. Made from 80% polyester and 20% polyamide, the towel is durable and easy to clean.
Features:

• Practical pit towel in classic RUDDOG colors
• Ideal as an alternative or complement to pit mats
• Dimensions: 100 cm x 70 cm
• Foldable and space-saving
• Material: 80% polyester, 20% polyamide
• Budget-friendly solution for model builders and as a gift

Iris ONE Bumper Set

Iris ONE Spring Insert Set

Iris Shock O-Ring 8x2mm (4pcs | red)

Iris ONE Shock Guide Shim Set

Iris ONE.05 FWD CF Front Steering Arm (2pcs)

Iris ONE Suspension Ball Adjustment Nut Set

Iris ONE Suspension Arm Set

Iris ONE Rear Steering Arm Carbon Fiber (2pcs)

Iris ONE Inner Hinge Pin (4pcs)

Iris ONE Ball Cup Set

Iris ONE Aluminium Turnbuckle 42mm (2pcs)

Iris ONE Aluminium Turnbuckle 28mm (2pcs)

Iris ONE V2 DJ Front Driveshaft Set

Iris ONE.05 FWD Belt Pulley 20T

Iris ONE.05 FWD Belt Pulley Washer

Iris ONE.05 FWD Rear Wheel Axle (2pcs)

Iris ONE.05 FWD Spur Gear Adapter

Iris ONE DJ Coupler Set

Iris ONE Differential Set V2

Iris ONE Differential Seal and O-Ring Set V2

Iris ONE Differential Outdrive (2pcs)

Iris ONE Differential Case Set

The Iris 6.5x3.75mm Suspension Ballstud +1.5mm Neck - Titanium are an easy way to adjust the hub height and thus the roll center of the Iris ONE. They are made from titanium, making them significantly lighter than the steel version. The thread height has also been lengthened to provide even further adjustability. They are an essential tuning part to optimally adapt the handling of your Iris ONE to the respective track.

Product Features:

• Made from titanium, significantly lighter than the steel version
• Allows adjustment of the hub height
• Extended thread height for additional adjustability
• Ideal for fine-tuning the handling of your Iris ONE

The Iris 6.5x3.75mm Suspension Ballstud +1.5mm Neck are an easy way to adjust the hub height and thus the roll center of the Iris ONE. The thread height has also been lengthened to provide even further adjustability. They are an essential tuning part to optimally adapt the handling of your Iris ONE to the respective track.

Product Features:

• Allows adjustment of the hub height
• Extended thread height for additional adjustability
• Ideal for fine-tuning the handling of your Iris ONE

Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.

• Machined from Ti6Al4V Grade 5
• Over 40% lighter than steel bullstuds
• 2pcs per pack

Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.

• Machined from Ti6Al4V Grade 5
• Over 40% lighter than steel bullstuds
• 2pcs per pack

Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.

• Machined from Ti6Al4V Grade 5
• Over 40% lighter than steel bullstuds
• 2pcs per pack

Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.

• Machined from Ti6Al4V Grade 5
• Over 40% lighter than steel bullstuds
• 2pcs per pack

Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.

• Machined from Ti6Al4V Grade 5
• Over 40% lighter than steel bullstuds
• 2pcs per pack

Iris ONE.05 FWD Rear Chassis Stiffener Set

Iris ONE Shock Sealing (4pcs)

Iris ONE Body Post Set

Iris O-Ring 6.2x1mm (4pcs)

Iris Machined Spur Gear 90T 64dp

Iris Machined Spur Gear 100T 64dp

Iris ONE.05 FWD Steering Turnbuckle 86mm

Iris ONE Spring Set C=9.8 (2pcs)

Iris ONE Spring Set C=40.7 (2pcs)

Iris ONE Spring Set C=33.1 (2pcs)

Iris ONE Spring Set C=29.8 (2pcs)

Iris ONE Spring Set C=26.7 (2pcs)

Iris ONE Spring Set C=23.9 (2pcs)

Iris ONE Spring Set C=21.2 (2pcs)