Light oil for bearings and transmissions etc. Easy to use pen type needle applicator.

Reedy 540-SL/550SL BEARINGS, STEEL

This blade serves as a 2.0 hexagon socket replacement for screwdrivers and is coated with HSS titanium.

Technical Specifications

Revolution Design Tungsten Balance Weight 11g | 20x10x3mm

This postage-stamp–sized tungsten block squeezes 11 g of ballast into just 20 × 10 mm and a mere 3 mm height. Thanks to tungsten’s density of ≈ 19.3 g cm⁻³ - more than double that of brass and lead - the weight occupies roughly half the volume a brass plate would need, so you can meet minimum weight rules and fine-tune chassis balance without giving up precious real estate in a crowded 1/10-scale layout. Slip it under or next to the receiver, servo or ESC and lower the centre of gravity for calmer weight transfer and more predictable corner-to-corner behaviour.

FEATURES

• Ultra-dense tungsten packs maximum mass into minimum space
• Tiny 20 × 10 mm footprint fits under most electronics or battery straps
• Low 3 mm profile keeps CG down and chassis flex unaffected

TECHNICAL DATA

• Material: tungsten alloy
• Weight: 11 g ± 1 %
• Dimensions (L × W × H): 20 × 10 × 3 mm
• Finish: fine-ground natural grey

Revolution Design Tungsten Balance Weight 17g | 25x6x6mm

Need just a little more mass but have almost no room left? The Revolution Design Tungsten Balance Weight 25x6x6mm delivers 17 g of perfectly centred ballast in a shape that tucks neatly alongside chassis braces or between electronics. Because tungsten is over 60 % denser than lead and brass, the weight is slimmer and lower than any equivalent brass bar, helping you hit the rulebook minimum.

FEATURES

• 17 g of ballast in a slim 25 × 6 × 6 mm rod
• High-density tungsten keeps mass low and central for improved CG
• Ideal for fore-aft or left-right fine-tuning in 1/10 touring, drift and off-road cars
• Burr-free edges, laser-etched logo and corrosion-resistant natural finish

TECHNICAL DATA

• Material: tungsten alloy
• Weight: 17 g ± 1 %
• Dimensions (L × W × H): 25 × 6 × 6 mm
• Finish: fine-ground natural grey

Maximize your 1/8 Brushless engine's cooling with the Revolution Design Ultra 1/8 Fan Mount Kit. Specially tailored for engines with a 40mm diameter, this mounting kit offers flexible and efficient adaptation. Compatible with both 30mm and 40mm fans, it grants the liberty to select the fan best suited to your needs. With its sturdy design and straightforward assembly, it's the ideal upgrade to enhance your engine's performance and lifespan.

Features:

• Compatible with 1/8 Brushless engines of 40mm diameter
• Supports both 30mm and 40mm fans for utmost flexibility
• Robust construction ensuring lasting durability
• Easy assembly and dependable Fixation.

Revolution Design Ultra Bearing 5x10x4mm flanged (4pcs)

The Revolution Design Ultra Bearings are high-quality flanged ball bearings featuring one metal and one rubber seal. This design ensures a perfect balance of smooth operation and dirt protection, making them ideal for demanding RC applications.

Product Features:

• High-quality flanged ball bearings for maximum performance
• One metal and one rubber seal for optimized smoothness and protection
• Dimensions: 5x10x4mm (inner diameter x outer diameter x width)
• Pack of 4 bearings
• Available in various sizes
• Premium quality at a fair price

Revolution Design Ultra Bearing 5x9x3mm Flanged (4pcs)

Revolution Design Ultra Bearings are high-quality flanged ball bearings in the size 5x9x3mm, featuring plastic seals on both sides. This design ensures excellent smoothness while providing high resistance to dirt. Revolution Design Ultra Bearings are available in various sizes and offer outstanding quality at a fair price.

Features

• High-quality flanged ball bearings with plastic seals on both sides
• Excellent smoothness and high dirt resistance
• Inner diameter: 5mm
• Outer diameter: 9mm
• Width: 3mm
• Available in various sizes
• Outstanding quality at a fair price

RHI Bullet PLUG 4.0mm Gold-Plated (2)

From RC enthusiasts to World Class Drivers seeking to adjust their shock oil quickly between heats, the Ride Air Remover has become a must-have among all RC accessories over the years.

It was time to redefine our best seller.

The Long version is then adapted for long length shocks commonly used in Off-Road application.

Upgraded Long Air Remover version (29101) includes the following new contents:

·         Lightweight damper stand can receive countless types of shocks and also gear differential.

·         Includes a handy and light pouch for easy transportation.

Ride Body Hole Mending Patch

Ride Body Protect Sponge Pad incl. Adhesive Tape - White

RipTech RC's wire features pure copper construction with an exceptionally high strand count. What sets it apart is its narrower outer diameter, providing unparalleled flexibility for your RC car, plane or boat. Designed by racers at Riptech RC specifically for the racer. 

Pure Copper, No Compromises: Our wire is meticulously engineered from pure copper, without any tinned metal. This means you get uncompromised conductivity, ensuring every ounce of power is efficiently delivered to your RC vehicle.

Flexibility: We've pushed the boundaries of wire design to bring you the ultimate in flexibility. Our wire boasts a super-thin outer diameter. This unique combination allows you to harness the benefits of thicker wire while enjoying the flexibility of a thinner version.

Improved Balance: Common wires can cause tweak within your RC, causing it to handle unevenly. With Riptech wire, we're providing a thick wire for power delivery, with the flexibility of a thinner wire. Reducing the chances of making your chassis uneven. Why should you have to compromise handling for power when you can have both?

High Strand Count, Maximum Performance: Our wire features a super high strand count, enhancing both its durability and performance. It can withstand the rigors of RC racing and off-road adventures, ensuring your vehicle remains responsive and reliable.

RipTech Performance titanium screw kits

Why Titanium? The standout feature of these titanium screw kits is their approximate 45% weight saving over standard steel screws. Titanium is renowned for its exceptional strength-to-weight ratio, making it the ideal choice for competitive RC racing. Shedding excess weight allowing for a better balance and lower COG for quicker acceleration, improved cornering, and increased overall speed.

Content: The kits includes all the top side screws you'll need for your car (please note: it does not include under chassis screws as they are not required for performance), ensuring a hassle-free upgrade process.

Improved Handling: The reduced weight provided by our titanium screws enhances your cars balance and responsiveness. Your car will corner sharper, accelerate faster, and maintain better stability, giving you the competitive edge you've been looking for.

Precision Craftsmanship: Our screws are machined to perfection, guaranteeing consistent quality and performance.

Proven Results: RC racers have experienced significant performance improvements with our titanium screws.

Easy Installation: Replace your stock screws with our titanium ones using standard RC 2mm hex tool.

Images are to show product only, quantity and size will vary to your specified kit.

Roadstick anti slip a way carpet 2

het enige smeermiddel dat is toe gestaan bij mrc vianen voor 2024.
zo wel voor rubber banden als voor foam banden te gebruiken.

Robitronic  Assortment Case 8 compartments 208x119x33mm

Robitronic 1/8 Buggy Dirtbag

Robitronic Assortment Case 10 compartments variable 134x100x29mm

The ideal way to bring order to your workshop. This handy sorting and storage box made of environmentally friendly PP plastic offers enough space for spare parts and accessories. The quick-release fastener on the side perfectly protects the contents from falling out and with the freely usable partitions you determine the space distribution.

Technical Specifications:

Robitronic Assortment Case 12 compartments variabel 260x125x43.5mm

Robitronic Assortment Case 18 compartments 210x119x34.5mm