Aerox Needle Nose Pliers - Long Slimline

Aerox Needle Nose Pliers - Long Slimline

From the Aerox brand these needle nose pliers are a useful specialist tool for those fine actions that need a little delicate precision. 

- Long, slimline jaws providing excellent grip.
- Designed to reach tight areas & to hold small objects.
- Slim, thin & sharp jaw blades.
- Non-slip handle for excellent handling.
- Return spring for easy handling.
- Protection cap included.
- 150mm overall length.
- 58mm jaw length.
- Use with caution, too much force can bend the tools tip.

Aerox Side Cutters - Slim Double Edge

Aerox Side Cutters - Slim Double Edge

From the Aerox brand are these plastic specific side cutters.

Designed to remove plastic parts from a sprue.

- Double Edge - Two sharp cutting blades.
- Slim, thin & sharp jaw blades enabling easier removal of smaller parts with less clearance around the sprue.
- Well balanced & centred, offers best cut.
- Adjustable screw to protect the precision blades from damage.
- Non-slip handle for excellent handling.
- Protection cap included.
- 120mm overall length.
- Best for use on plastic parts with a diameter of less than 3mm.
- For hard plastics cutting diameter is limited to 1.5mm.
- Use with caution, cut plastic parts only.  The blades may be damaged with improper use.

AEROX Solder 30g Reel

AEROX Solder 30g Reel

AEROX SOLDERING STATION 150HS EU 220-240V

Introducing from AEROX the awesome 150HS Soldering Station.

A fully adjustable quality soldering station at a great price.

This version is the 220-240V version with European plug.

Features

- 150W of power!
 Fully adjustable temperature from 100 to 500 Degrees C.
- Super fast heat up.
- Fantastic tip cleaning solutions.
- Internal solder roll holder - Never lose your solder. Allows solder to be dispensed through the front of the unit so always ready to use. (Not pictured)
- Available with 3 different plugs for UK and Europe (220-240V) and USA (110-120V). 
- Large bevel tip included, optional fine point and chisel tips available.
- Optional  'Helping Hands' to assist when soldering.

Specifications

Model - 150HS
Power - 150W
Input Voltage -  230VAC (UK/EU) (50-60Hz)
Temp. Range - 100-500℃(212-932℉)
Temp. Stability - ±2℃(±4℉) {>200℃(400℉)}
Temp. Compensation - ±50℃(±90℉)
Temp. Display - Digital
Tip to ground impedance - <0.1Ω
Tip to ground voltage - <2mV
Heater - T60 integrated PTC ceramic heater
Cable length - Power cord: 90cm Handle cable: 1.2m
Dimensions main unit: 80 x 184 x 142mm handle: 24.5 x 224mm
Net weight 516g

Aerox TC Droop Gauge & Disks

Aerox TC Droop Gauge & Disks

Introducing the new Aerox droop gauge set for 1-10th Touring cars.

A new universal way to take the confusion out of measuring droop across different chassis manufacturers.

Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.

Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.

For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.

Aerox TC Droop Gauge Set

Aerox TC Droop Gauge Set

Introducing the new Aerox droop gauge set for 1-10th Touring cars.

A new universal way to take the confusion out of measuring droop across different chassis manufacturers.

Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.

Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.

For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.



As a starting point, we recommend a droop gauge value of:

Tarmac/Asphalt
Front: 22 - 23mm
Rear: 21 - 22mm

Carpet
Front: 22.5 - 23.5mm
Rear: 21.5 - 22.5mm

Aerox Touring Car Body Rear Stiffeners

Aerox Touring Car Body Rear Stiffeners

Introducing these Touring Car body stiffeners from Aerox.

Designed to improve the the bodyshells stiffness and therefore it's form at high speeds, these stiffeners are ideal when using the new Ultra Light Weight bodyshells.

With Centre of Gravity in mind, these have been designed to be as light as possible.  Weighing in at just 1.1g (without tape) for the rear.

Side stiffeners are also available AX035.

Important: In some cases super glue such as CR522 must be used to fix the Carbon Rods into the brackets. This is best achieved after installation onto the bodyshell.

Supplied with double sided tape.

Aerox Touring Car Body Side Stiffeners

Aerox Touring Car Body Side Stiffeners

Introducing these Touring Car body stiffeners from Aerox.

Designed to improve the the bodyshells stiffness and therefore it's form at high speeds, these stiffeners are ideal when using the new Ultra Light Weight bodyshells.

With Centre of Gravity in mind, these have been designed to be as light as possible. Weighing in at just 1.3g (without tape) for the sides.

Rear stiffeners are also available AX036.

Important: In some cases super glue such as CR522 must be used to fix the Carbon Rods into the brackets. This is best achieved after installation onto the bodyshell.

Supplied with double sided tape.

Alfa Romeo TZ3 Corsa Body Shell Red (Printed)

Alfa Romeo TZ3 Corsa Body Shell Red (Printed)

ALLOY OFFSET SERVO ARM 25T - FUTABA

Black Alloy Servo Arms from CORE RC. Available in the popular 23T and 25T splines these alloy offset servo arms are ideal for a variety of vehicles and should be very popular for the Mi5evo for those who want to square up the servo/electronics installation.

 

Multi position pick up and with lightweight clamping screw.

Multi hole positions, 16mm, 19mm, 22mm and 25mm.

Aluminium Wing Washers 11.5mm - Black/Gold (pr)

Aluminium Wing Washers 11.5mm - Black/Gold (pr)

Black and Gold wing washers from MonkeyKingRC. Small 11.5mm diameter and very lightweight. Gives the modern lightweight wings more support. Neat and cool look.

Aluminium Wing Washers 11.5mm - Black/Green (pr)

Aluminium Wing Washers 11.5mm - Black/Green (pr)

Black and Green wing washers from MonkeyKingRC. Small 11.5mm diameter and very lightweight. Gives the modern lightweight wings more support. Neat and cool look.

ARROWMAX INBUSSLEUTEL .078 (5/64") X100MM ZWART GOUD

ARROWMAX INBUSSLEUTEL .078 (5/64") X100MM ZWART GOUD

ARROWMAX INBUSSLEUTEL 1,5 X 120 MM ALLEEN PUNT-WOLFRAAMSTAAL

ARROWMAX INBUSSLEUTEL 1,5 X 120 MM ALLEEN PUNT-WOLFRAAMSTAAL VERVANG STIFT

ARROWMAX INBUSSLEUTEL 2.0X120MM TIP ALLEEN WOLFRAAMSTAAL VERVANG STIFT

ARROWMAX INBUSSLEUTEL 2.0X120MM TIP ALLEEN WOLFRAAMSTAAL VERVANG STIFT

ARROWMAX KRUISKOPSCHROEVENDRAAIER 4.0 X 100MM ZWART GOUD

ARROWMAX KRUISKOPSCHROEVENDRAAIER 4.0 X 100MM ZWART GOUD

ARROWMAX MOERSLEUTEL 4.5 X 100MM ZWART GOUD

ARROWMAX MOERSLEUTEL 4.5 X 100MM ZWART GOUD

Arrowmax Spur Gear 48DP 74T

Arrowmax Spur Gear 48DP 74T

Arrowmax Spur Gear 48DP 75T

Arrowmax Spur Gear 48DP 75T

Arrowmax Spur Gear 48DP 78T

Arrowmax Spur Gear 48DP 78T