RUDDOG Racing 7000mAh 150C/75C 7.6V 113mm Mid Short Stick Pack LiPo-HV Battery

The RUDDOG Racing 7000mAh 150C/75C 7.6V 113mm Mid Short Stick Pack LiPo-HV battery is a new 25mm high mid short stick pack battery with a length of 113mm, which has been specially developed for use in 1:8 buggies such as the Team Associated RC8B4 | RC8B4.1 or the Xray XB8E 2025. It fits perfectly into the battery mount and offers a significantly higher capacity and correspondingly more track time compared to standard Shorty Pack batteries. The battery also consists of 75C/150C high-performance cells that guarantee exceptional performance on every drive. The latest Spec Silicon Graphene Lithium Polymer cells offer an even lower internal resistance resulting in a higher power output, so you can push your vehicle to the limit with confidence.

Whether you're looking for a battery that can keep up with your high performance demands, or you're simply looking for a reliable, long-lasting option for your race car, the RUDDOG Racing LiHV battery series is the perfect choice. Switch to the power and performance of RUDDOG Racing batteries today!

 
Features:

• 113mm length, perfect for 1:8 Buggys from Team Associated and Xray
• High-capacity 75C/150C cells for exceptional performance.
• Latest Silicon Graphene Lithium Polymer cells for improved internal resistance and higher power output.
• Low internal resistance for maximum power delivery.
• High capacity for longer run times.
• Lightweight construction.
• EFRA and BRCA approved

 
Specifications:

• Capacity: 7000mAh
• Nominal voltage: 7.6V | 2S | LiHV
• Discharge Rate: 75C/150C
• Cell type: Silicon Graphene Lithium Polymer
• Length: 113mm
• Width: 46.5mm
• Height: 25.0mm
• Weight: 250g
• Connector: 5mm
• Balancer plug: 2mm

Charging and storage instructions:

Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries regulary, if you don't go to the track, then cycle them once every two weeks. The batteries must not be stored in direct sunlight, this also includes your car during a hot summer day. For a long lifetime of your batteries we recommend a charging rate of 1C. A higher charging rate will decrease the lifetime of your battery significantly.

The RUDDOG RR492 is a powerful 2.4GHz 4-channel FH5 receiver that has been specially developed for compatibility with selected latest generation Sanwa remote controls. The RR492 is the ideal choice for anyone looking for an affordable but high quality alternative Receiver for their Sanwa remote control. The RR492 is compatible with the Sanwa transmitters M17, MT-5 and MT-R and supports both FH5 and FH5U.

Key Features:

• Sanwa Compatibility: Seamlessly works with select Sanwa radio systems.
• FH5 and FH5U Support: Ensures smooth operation and state-of-the-art Transmission.
• Compact and Lightweight Design: With a size of only 18.5 x 20.5 x 28.0 mm and a weight of only 5 g, the RUDDOG RR492 fits in most vehicles.
• Proven on the Track: extensively tested at national and international events, including prestigious events such as the EOS.

Specifications:

• Dimensions: 18.5x20.5x28.0mm
• Weight: 5g
• Voltage Input: 3.5-8.4V

This receiver is compatible with the following Sanwa transmitters:

• Sanwa M17
• Sanwa MT-5
• Sanwa MT-R

Ruddog Products' latest addition to their ever-increasing range of universal tools are the soft-grip straight scissors. With an overall length of 17 cm, the straight scissors fit inside every toolbox. Its 7.5 cm blades with black titanium nitride coating cut tough plastics just as easily as soft foam inserts or thin decals. The soft grip handles ensure safe and comfortable use.

Ruddog Thread Lock Medium (15g, Blue)

Rush Pre-Glued Carpet Tyres 28CPM VR2 Premium Grip (4pcs)

Rush Pre-Glued Tyres 32S VR3 High Precision (4pcs)

Rush Pre-Glued Tyres 32X VR3 High Precision (4pcs)

Rush Pre-Glued Tyres 36S VR3 High Precision (4pcs)

Rush 32M R2 tyres are mounted on a new softer wheel for more traction.

BTCC Control tyre for 2019 and 2020.

French Control Tyres for FFVRC Nationals 2020.

BRCA Proposed Control tyres for 2020.

Pre-mounted and expertly glued with a medium moulded insert. The 32M R2 is a hard wearing and consistent tyre ideal for medium temperature conditions, good for many runs without such significant drop off compared to other brands.

SANDER BANDS X 3 - FINE

SANDER BANDS X 3 - MEDIUM

The SB-2263MG is a high speed, brushless, low profile servo that features an all black color for a stealth look in RC cars.

Features:

• Metal gear train ensures durability under harsh situations.
• Sleek black design with laser etching and a shorter 200mm black lead wire
• Ideal for 1/10 on road cars requiring a high speed servo

Specifications:

The SB-2263MG is a high speed, brushless, low profile servo that features an all black color for a stealth look in RC cars.

Features:

• Metal gear train ensures durability under harsh situations.
• Sleek black design with laser etching and a shorter 200mm black lead wire
• Ideal for 1/10 on road cars requiring a high speed servo

Specifications:

Savöx SC-1252MG+ Low Profile (0.07s/7kg/6.0V) Coreless Servo

Features:

• SSR compatible (enables ONLY in connection with SANWA RC kits type M-17, M-12S, M12RS, MT-44, MT-5 maximum transmission speed and precision)
• SOFT START : Soft start (protects the servo and the rudder control mechanism when the on-board electronics are switched on)
• Top technology with super high 12-bit (4096) resolution.
• The servo is fitted with a Coreless motor and metal gears.
• Extremely strong metal gears ensure long life and durability.
• Coreless motor for smooth operation and efficiency.
• Ideal for 1/10 On-Road models
• for RC Heli and RC airplanes

Specifications:

Productinformatie "Schokdemper Pits Holder V2 Zwart"

Dit multifunctionele talent van Robitronic wordt voornamelijk gebruikt als hulpmiddel bij het vullen van schokdempers - ideaal voor de schaal 1/10.

De standaard bestaat uit 9 afzonderlijke onderdelen die alleen maar in elkaar gestoken hoeven te worden. Aan de onderkant bevindt zich een praktisch magneetbord voor schroeven, splitpennen en dergelijke. Hiervoor biedt de standaard 12 gaten die moeten worden opgevuld, met 4 extra stangen, voor het ophangen van bijv. veren.

De vier gaten op de bovenverdieping hebben een diameter van 18,4 mm, de bovenrand van de bovenverdieping meet ca. 96 mm tot de vloer. De gaten op het onderste niveau zijn conisch naar beneden en hebben een diameter van 17 mm en zijn verkleind tot 14,2 mm. De bovenrand meet ca. 72 mm tot de vloer wpp En met de 4 statieven die aan de zijkant kunnen worden geopend, heb JIJ nog meer ruimte beschikbaar. Ook hier worden conische gaten (14,2 mm-12,5 mm) geboord.

Technische specificaties:

• Dikte van de kunststof onderdelen 3,5 mm
• De golfvormige (laterale) insnijdingen op de bovenverdieping zijn ca. 4 mm breed
• Het magnetisch veld meet ca. 27 mm x 84,5 mm
• Afmetingen (H x B x D): ca. 100 x 141 x 68 mm

Schumacher Foam Tyre Insert - for 1/8 - Medium (1 pair)

The Mission FT is an ideal introduction to the popular front wheel drive class.
The Mission FT is based on Schumacher’s fast, durable, and race proven Mission platform. It features a forward motor position for maximum traction and fully adjustable suspension with alloy threaded shocks to handle the toughest carpet
or asphalt tracks. The strong driveshafts can cope with the rigors of fronty class racing, even with powerful modified motors. Should you want try your hand at 4WD the Mission FT can easily be converted into a great handling 4WD touring car. In either 2WD or 4WD configuration the Mission FT is fun to drive, and awesome to race.


 

• Motor positioned closely behind the front axle – perfect for FWD
• Forward weight distribution – for better traction
• Alloy motor mount - Strength and motor heat dissipation
• Gear differential – offers maximum adjustability and low maintenance
• Large differential and layshaft pulleys - Minimises belt loading without the belt jumping and maximises belt efficiency
• Alloy front driveshaft bone and steel axle – great for both weight and strength
• Lightweight alloy rear axles – low inertia for increased acceleration
• 12 piece ball bearing set - Ultra low rolling resistance
• Single-pivot steering for optimal Ackermann
• Rear in-board toe-in options - For excellent traction on slippery surfaces
• Rear out-board toe-in options via track rod – quick toe in adjustments
• Front and rear anti-roll bars included
• Threaded shock bodies – fast and easy ride height adjustments
• Lightweight front bumper design
• 2S Shorty LiPo required for kit FWD.  2S Full stick can be used in 4WD conversion.
• Quick release battery mounting – no tape required

Hoogwaardige set van 4 schroevendraaiers in kruis- en sleufvorm en in een nobel ontwerp. De volgende maten zijn inbegrepen: -3.0, -4.0, +3.0, +5.0.

Technische specificaties

• Inhoud 20ml
• Viscositeit dun
• Hart  zeer snel uit
• Geschikt voor hout, rubber, kunststof en  metaal
• Universeel bruikbaar

Artikel nummer: 806031

SERPENT ELCTRA MOTOR 1401