LIPO O RING PK6 - E2/5,ICON/2,A3

LIPO O RING PK6 - E2/5,ICON/2,A3

LOW OPTION HEXAGON 3D BUMPER - ECLIPSE 5

Voor de Eclipse-reeks auto's is deze optionele 3D-geprinte lichtgewicht bumper.

De bumper biedt dezelfde lichaamsondersteuning en geweldige bescherming voor de carrosserie als het kitonderdeel in de Eclipse 5-kit.

Deze nieuwe versie verlaagt de hoogte van de carrosserie aan de voorkant met ongeveer 3 mm, wat geweldig is voor racers die hun carrosserie agressief willen monteren.

Het is ook een ideale optie bij het gebruik van verschillende carrosserieën, waaronder de nieuwe Montech M22 en de populaire BA006.

M3 Alloy Thread Insert pk8

M3 Alloy Thread Insert pk8

Alloy M3 treaded inserts to upgrade the U7689  brass inserts. Lighter and cool black colour !

M3 Alloy Washer Black 1.5 mm (pk10)SCHUMACHER

Vul hieronder de algemene informatie van het product in. Dit zijn de basisgegevens van een product. De productnaam is een verplicht veld omdat deze altijd getoond wordt.

Product actieflive_help
Ja
Nee

M3 Black Alloy Washers 0.5mm (pk12) Item No. U4862 SCHUMACHER

M3 Black Alloy Washers 0.5mm (pk12) Item No. U4862 SCHUMACHER

M3 Black Alloy Washers 1.00mm (pk10)SCHUMACHER

M3 Black Alloy Washers 1.00mm (pk10)SCHUMACHER

M3 Black Alloy Washers 3.00mm (pk10)SCHUMACHER

M3 Black Alloy Washers 3.00mm (pk10)SCHUMACHER

Mass Damper Spring - Green - Hard (pr)SCHUMACHER

Mass Damper Spring - Green - Hard (pr)SCHUMACHER

Mass Damper Spring Chart
U8183 - Silver - Super Soft (pr)
U8182 - Yellow - Soft (pr)
U8130 - Red - Medium (pr)
U8131 - Green - Hard (pr)

Pro Ball Bearings 1/4 x 3/8 x 1/8 Fl Shielded

Pro Ball Bearings 1/4 x 3/8 x 1/8 Fl Shielded

Extremely high quality 'Pro' ball bearing for LMP12 and rear axle.

Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

Pro Ball Bearings 1/8 x 5/16 x 9/64 Fl Shielded

Pro Ball Bearings 1/8 x 5/16 x 9/64 Fl Shielded

Extremely high quality 'Pro' ball bearing for LMP12 and GT12 front wheels.

Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

Rear Spring Black - Ultra pr - A-A3,E1-E6,Ic/2

Rear Spring Black - Ultra pr - A-A3,E1-E6,Ic/2

For the Eclipse and the Atom new Hard/Ultra shock spring harder than all the kit range springs and the hardest in the range.

Rear Spring Red Dot-Hard Ultra pr-A1-A3,E1-E6,Ic/2

Rear Spring Red Dot-Hard Ultra pr-A1-A3,E1-E6,Ic/2

For the Eclipse and the Atom new Hard/Ultra shock spring harder than all the kit range springs.

Rear Springs Black - Soft pr - A1-A3,E1-E6,Icon/2

Rear Springs Black - Soft pr - A1-A3,E1-E6,Icon/2

Rear Springs Gold -Med/Hard pr - A1-A3,E1-E6,Ic/2

Rear Springs Gold -Med/Hard pr - A1-A3,E1-E6,Ic/2

Rear Springs Nickel - Hard pr - A1-A3,E1-E6,Icon/2

Rear Springs Nickel - Hard pr - A1-A3,E1-E6,Icon/2

REAR SPRINGS SILVER - MED/SOFT PR-A1-A3,E1-E5,IC/2 SCHUMACHER

REAR SPRINGS SILVER - MED/SOFT PR-A1-A3,E1-E5,IC/2

RED TRANSMISSION OIL LUBRICATOR PEN

Light oil for bearings and transmissions etc. Easy to use pen type needle applicator.

RIPTECH RC - TI UPPER SCREW KIT - ECLIPSE 5

RipTech Performance titanium screw kits

Why Titanium? The standout feature of these titanium screw kits is their approximate 45% weight saving over standard steel screws. Titanium is renowned for its exceptional strength-to-weight ratio, making it the ideal choice for competitive RC racing. Shedding excess weight allowing for a better balance and lower COG for quicker acceleration, improved cornering, and increased overall speed.

Content: The kits includes all the top side screws you'll need for your car (please note: it does not include under chassis screws as they are not required for performance), ensuring a hassle-free upgrade process.

Improved Handling: The reduced weight provided by our titanium screws enhances your cars balance and responsiveness. Your car will corner sharper, accelerate faster, and maintain better stability, giving you the competitive edge you've been looking for.

Precision Craftsmanship: Our screws are machined to perfection, guaranteeing consistent quality and performance.

Proven Results: RC racers have experienced significant performance improvements with our titanium screws.

Easy Installation: Replace your stock screws with our titanium ones using standard RC 2mm hex tool.

Images are to show product only, quantity and size will vary to your specified kit.

Sanwa Servo Spacer pr - E1-E6

Sanwa Servo Spacer pr - E1-E6

This pair of 1mm spacers provides an easy solution to assembling the Sanwa SRG-HR into an Eclipse 2 kit. It provides multiple useful functions;
- M3 nuts can be placed into the spacer and held in place easily during assembly, with no need for a
nut runner / spanner to secure.
- Because of this, servo can be placed centrally far easier, using only a hex driver.
- Raising the servo up to ensure all common servo savers don’t protrude underside of the chassis.

SCHUMACHER 6 x 1 'O'ring pk10 - Mi7,Icon/2,E4,Mi8,E5,A3,FT8

6 x 1 'O'ring pk10 - Mi7,Icon/2,E4,Mi8,E5,A3,FT8