Dash Silicon Wire 13AWG White 1m

Dash Silicon Wire 13AWG White 1m

Dragster-3 18TMOTOR Carson

Dragster-3 18TMOTOR  Carson 

Dry PTFE Chain Lube 400ml

Model: MOF949

Fabrikant: Muc-Off

Muc-Off Dry PTFE Chain Lube is a highly versatile, dry weather chain lube. Our advanced ‘Dry Formula’ creates a clean, durable and protective chain wax layer that inhibits rust development and chain link corrosion. The added PTFE creates exceptionally low surface friction .

DRY-FLUID EXTREME RC CAR - 20ML

HIGH END SLIDE-LUBRICANT FOR LINKS, SHAFTS AND BEARINGS

BALSAM FOR RC CARS

DryFluid Extreme was specially developed for radio controlled model cars with the aim to preserve as long as possible or rather to extend significantly the efficiency and lifetime of these mechanical marvels.

The effect of this new lubricant for links, shafts and bearings begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were the main objectives of the development. Findings in the aviation and vehicle industries and the expert knowledge of RC car pilots are the driving forces behind this new lubricant.

SLIDE-LUBRICANT INSTEAD OF OIL

DryFLuid is a dry slide-lubricant rather than a classic oil or grease. DryFluid is not wax, it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high end sliding fluids. The application and long-term effects of DryFluid Extreme will inspire every RC pilot.

PRODUCT-FEATURES

Reduction of power loss on links, shafts and bearings and it guarantees a long life of the treated components.

Lowest sliding friction for free movement and wear reduction

Multistage lubricant system with immediate and long-term effects

Dust and dirt repellent

Extremely good creeping abilities

Excellent material compatibility with all current metal, plastic and natural rubber materials Outstanding adhesive and anti-corrosive properties

This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.

Within the UK it can only be sent by UPS not post.  Please only select UPS for the shipping method at the checkout.

DSSERVO DS3335 Digital Brushless 39KG/0.05sec@8.4V

DSSERVO DS3335 Digital Brushless 39KG/0.05sec@8.4V

DSSERVO DS3335 - Compact 35KG Brushless Servo with Precision Full Metal Gears

Features:

• Brushless motor for high durability and performance
• Up to 39kgcm torque at 8.4V
• Fast response: only 0.05 sec/60° at 8.4V
• Full metal housing made of stainless steel & aluminum
• 2µsec deadband & 1520µs / 333Hz frequency
• Includes 25T aluminum servo arm and accessories

Technical Specifications:

Voltage:	5.0V	7.4V	8.4V
Torque:	26 kgcm	35 kgcm	39 kgcm
Speed:	0.10 sec/60°	0.06 sec/60°	0.05 sec/60°
Motor:	Brushless
Gears:	Stainless Steel & Aluminum
Dimensions:	40 × 20 × 38.5mm
Weight:	60g
Frequency:	1520µs / 333Hz
Deadband:	2µsec

ECLIPSE 5 - 1/12TH CIRCUIT - KIT

The Schumacher Eclipse cars are the current reigning 1/12th scale IFMAR World and EFRA European Champions in both modified and stock classes. 

The New Eclipse 5 features an extensive list of refinements, making it even faster and better handling.

The Eclipse 5 is the ultimate professional LMP12 racing chassis kit. The choice of champions!
 

• NEW - Alloy chassis design with a much shorter overall length.  This allows for reduced chassis scrubbing along with a significant weight reduction from beyond both front and rear axles.  These benefits allow the car to enter a corner more effortlessly and when in the corner, rotation is achieved more freely.  
• NEW - Upgraded left and right rear hex wheel clamps to prevent any wheel wobble issues.  Now perfectly true running wheels with our unique single nut rear wheels/solid axle!
• NEW - Servo mounting has been improved, resulting in direct mounting for the Sanwa micro range of servos such as the PGS-HR and SRG-HR.  Direct and easy alignment onto the centre of the car.  In doing this the chassis flexibility characteristics have been vastly improved, for performance and strength, by removing the large, off centre transverse slots previously used.  All other brands of servo still can be used with the ultra-lightweight floating servo mount, included.
• NEW - Lightweight and flexible 3D printed rubber bumper, offering perfect body shell protection.  Compared to the previous foam bumper, it is also very durable and long lasting.
• NEW - Black aluminium steering turnbuckles now included.  Stealth and lighter weight. 
• NEW - Updated top decks design, further reducing the polar moment of inertia.  They now secure at the front within the wheelbase.
• NEW - The front lower beam has been improved, mounting in line with the front axle, and further reducing this forward weight, allowing for the reduced chassis length.  The new beam makes use of super easy, slide in, speed secret ride height spacers. 0.5mm U7920 and 0.75mm U7921.
• NEW - Independent and lightweight front bumper mount makes front end assembly far easier.  The front bumper can now be removed with only 2 screws.
• NEW - Moulded lighter weight front hub carrier design with much improved suspension action and damping characteristics.  Un-sprung mass has also been reduced.
• NEW - Tweak free and easy LiPo mounting using new lighter weight O-ring fixing.
• NEW - Interchangeable front LiPo position stops with 4 equally spaced settings included. 
• NEW - Optional 1.0° camber strap available.  1.5° camber is included in the kit for maximum steering and lap time in most conditions.
• NEW - Pod offset has been refined to achieve the perfect pod balance with a wider range of modern motors.
• NEW - Lightweight pod carbon parts for lower centre of gravity and overall car weight.
• NEW - Underside Variable Chassis chamfers, offering improved ground clearance, smoother scrubbing and better clearance to curbs or other corner markers.

Not forgetting all the usual features that have made the Eclipse IFMAR World and EFRA European Champion.

- Range of optional colour coded front springs.
- Big Bore side and centre dampers offering long lasting damping. They also give great damping oil retention (less frequent maintenance required) and a compact and central design. Damper geometry changes have improved damping characteristics.
- Lightweight pod assembly for smoother, more predictable drivability and bump handling.  Strengthened for tweak prevention. 
- Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
- Rear ride height adjusters, easier adjustment and 0.25mm height increments.
- Front beam socket using O-ring fixing system.
- Thread insert design making work on the car much quicker and simpler.
- Easy body shell height adjustment.
- Extra low rear roll centre pivot height for awesome rear traction.
- Centre pivot design for easy build and maintenance, with a fully bind free design.
- All black nuts as standard.
- Perfectly balanced rear pod assembly.
- Ultra-low motor position.
- Full range of colour coded rear and side springs.
- Separate springs for independent roll and bump stiffness adjustment.
- Ball bearing front and rear axles.
- Adjustable toe-in/out.
- Chassis balance pivot holes. For use with U3582 Precision Balance Pivot Set. (Available Separately) To optimise left/right weight distribution.
- Rear tweak adjustment via side springs.
- Simple rear droop adjustment.
- Small Kimbrough servo saver with stiffener included as standard.
- High tensile steel hex screws used throughout.
- High quality easy to follow instruction manual.
- Range of World Championship Winning Contact RC foam tyres available.
- Accepts a huge range of industry standard body shells, motors, LiPo’s and speed controllers.
- Suitable for USA rules GT12 racing. 

Equipment Needed 2 Channel Radio Motor Servo Electric Speed Control 1S Lipo Battery Bodyshell & Paint Wheels and Tyres

Eclipse 5 Specification   Power Source: ELECTRIC Model Type: 2WD, ON-ROAD, COMPETITION Length: 280mm Width: 172mm Top Speed: 40 MPH+  Wheelbase:  202mm

Excel Double Honed Blade (5pcs)

Features:

• Made from carbon steel, #11 Blades
• Available in packs of 5, 15, 100, 500, 1000
• The double honed replacement blade has a strong tip and flex so you do not have to worry about breaking their edge and tip. 
• This versatile replacement blade fits with all standard light and medium duty Xacto style knives.
• Used with: cuts on paper, card-stock, stencils, film, photographs, tape, plastic, cork, wood, vinyl, cloth, leather, cardboard, foam boards and most other light-weight crafting. 
• Used for: model making, paper cutting, cake decorating, Cricut vinyl cutting and polymer clay.
• Used by graphic artists, architects, car wrappers, designers, hobbyists, scrapbook artists and crafters.
• Fits with: K1, K3, K17, K18, K26, K30, & K71 handles
• L – 1.575/ H – 0.350 / E - 0.975/ S – 0.250/ T – 0.020

EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)

EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)

EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)

EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)

EXTRA LONG BODY CLIP 1/10 - METALLIC PURPLE (6)

EXTRA LONG BODY CLIP 1/10 - METALLIC PURPLE (6)

Flat Head Hex Screw M2.6x10mm (10 pcs)

Flat Head Hex Screw M2.6x10mm (10 pcs)

Flysky FGr4D AFHDS3 Receiver 4CH

Product information "Flysky FGr4D AFHDS3 Receiver 4CH"

The bidirectional FGr4D receiver is equipped with 4 channels and runs the AFHDS3 protocol. Thanks to the two built-in antennas and the compact design, there are numerous possible applications in the smallest of spaces. In addition to the four channels, the receiver also offers 5 functional interfaces that can be configured with different signal types such as i-BUS2, S.BUS, i-BUS and PPM. The FGr4D is also waterproof according to the PPX6 standard.

Technical Specifications

PWM-Channels:	4
RF:	2.4GHz
Protocol:	AFHDS 3
Antennas:	Dual (internal)
Input Voltage:	3.5-9V
Output:	PWM/PPM/i-BUS/S.BUS/i-BUS 2
Temperature:	-10°C to +60°C
Max. Humidity:	20%-95%
Update:	Yes, online
Dimensions:	30.3x25.8x20mm
Weight:	7.2g
Suitable for:	Cars, Boats
Compatible Transmitter:	all AFHDS3-Transmitter

Flysky FS-GT2F 2 channel Radio Set with 1 ReceiverFlysky

The FS-GT2F is a simple 2-channel 2.4GHz transmitter and it is ideal for getting started with controlling RC car models and boats. The transmitter runs on the AFHDS2A protocol and the remote control comes with a built-in antenna. It can also be easily connected to the computer via the micro USB port so that the radio can be used, for example, as a controller in games or simulation programs.*

Features:

• AFHDS 2A
• Multi-channel hopping frequency
• Multidirectional antenna with amplification
• Unique ID recognition system
• Low energy consumption
• Automatic setting of 1 or 2-way communication
• Reliable communication even over longer distances

*Note: The FS-SM102 connection cable is recommended for connecting the transmitter to the computer when using the VRC software. This cable is optionally available and not included in here.

Technical Specifications:

Transmitter
Type:	2.4055 - 2.475GHz
Frequency Protocol:	AFHDS 2A and AFHDS
Channels:	2
RC Models:	Cars, Boats
Distance:	100 - 300m (Ground)
Channel Resolution:	1024
Battery:	4x 1.5V AA
Low Voltage Warning:	< 4.2V
Antenna Type:	Built-in single antenna
Display:	-
Charging Interface:	-
Data Interface:	Micro-USB (PPM)
Temperature Range:	0°C to +60°C
Humidity Range:	20% to 95%
Online Update:	No
Dimensions:	150x80x196mm
Weight:	323g
Receiver	FS-A3
Channels:	3
Type:	2.405 - 2.475GHz
Frequency Protocol:	AFHDS 2A
Suited Transmitter:	All transmitter with AFHDS 2A support
Antenna Type:	Single (150mm)
Voltage:	4-6.5V
Data Interface:	PWM
RSSI:	No
Temperature Range:	0°C to +60°C
Humidity Range:	20% to 95%
Online Update:	No
Dimensions:	35x22x12mm
Weight:	6g

Delivery:

• FlySky GT2F transmitter
• 1x receiver: FS-A3
• Manuals

Flysky Noble NB4+ Radio + 1 Receiver

De FlySky Noble NB4+ is een krachtige afstandsbediening met veel mogelijkheden voor RC auto en boot toepassingen.
Uitgerust met de derde generatie 2,4 GHz AFHDS-3 protocol en in combinatie met de meegeleverde FGr4B ontvanger, is de NB4+ een moderne oplossing die ook geschikt is voor gebruik in leraar-leerling situaties.
De eenvoudige bediening en duidelijke menunavigatie via het touchscreen maken het zelfs voor beginners gemakkelijk om te beginnen met het besturen van op afstand bestuurde modellen.

Kenmerken:

• Geavanceerde, moderne zender
• Uitgebreide leraar-leerling functie inbegrepen
• Ergonomisch ontwerp met draaibaar stuurwiel
• Geschikt voor rechts- en linkshandigen
• Dubbel batterijsysteem
• Intelligente RF-configuratie
• Lage latentie
• Kan ook worden gebruikt in simulaties etc. Toepassingen (standaard geactiveerd)

Technische gegevens:

Zender

• Type: 2,4GHz ISM
• Frequentieprotocol:AFHDS 3
• Kanalen:8
• RC modellen:Auto, boot
• Afstand: >300m (grond)
• Kanaalresolutie: 4096
• Batterij:- 1S / (4.2V) x 4300mAh LiPo
• - 3450mAh 18650 batterij
• Waarschuwing laag voltage: < 3.65V
• Type antenne: Externe enkele antenne
• Beeldscherm: 3,5-inch IPS aanraakscherm, resolutie 320x480px
• Oplaadinterface: USB-C
• Gegevensinterface: USB-C
• Temperatuurbereik:-10°C tot +60°C
• Vochtigheidsbereik:20% tot 95%
• Online update:Ja
• Abmessungen:131,41x115,95x190,56mm
• Gewicht:520g

OntvangerFGr4B

• PWM:4
• Type:2,4GHz ISM
• Frequentieprotocol:AFHDS 3
• Geschikte zenders:Alle zenders met AFHDS3 ondersteuning
• Antennetype: Enkele antenne
• Spanning:3.5-9V
• Gegevensinterface: PWM/PPM/i-BUS2/S.BUS/i-BUS
• Temperatuurbereik:-10°C tot +60°C
• Vochtigheidswaaier: 20% aan 95%
• Online update: Ja
• Abmessungen:17x29x16,6mm
• Gewicht: 6.4g

Omvang van de levering

• FlySky "NB4+" zender
• Ontvanger: FGr4B en kabel
• USB-gegevenskabel
• Greepschaal (S, L)
• Veren (S, L)
• Reserve gashendel
• 2x transparante beschermfolie
• Gebruiksaanwijzing

Flysky Noble NB4+Pro+ with 2 Receiver

Product information "Flysky Noble NB4-Pro+ with 2 Receiver"

The FlySky Noble NB4 Pro+ is the most powerful model in the NB4 series. In addition to high-quality craftsmanship and modern design, the NB4 Pro+ also impresses with top performance. The remote control is equipped with the third-generation 2.4 GHz AFHDS 3 protocol, enabling extremely low latency and precise control. The new interface makes it easy to operate, even for beginners, and offers plenty of room for optional configurations.

The transmitter features an ultra-fast 2-channel mode that ensures low latency, allowing users precise control even in the most hair-raising moments. The 3.5-inch display has been significantly improved compared to its predecessor and now boasts a powerful contrast and brightness, making the NB4 Pro+ ideal for outdoor use. Additionally, a USB-C input, a better battery, and a dual battery system are new.

The NB4 Pro+ comes in a high-quality PVC case with two receivers, just like its predecessor.

Features:

• Advanced, modern transmitter
• Includes trainer-student function
• Compatible with all iBUS2 devices and some Hobbywing products (e.g., Xerun AXE R2 ESC)
• Freely customizable channels
• Ergonomic design with swivel wheel
• Suitable for both right- and left-handed users
• Dual battery system
• Intelligent RF configuration
• Low latency
• Also usable in simulations and similar applications (enabled by default)

Technical Data
Type:	2.4GHz ISM
Frequency Protocol:	AFHDS 3
Software Version:	Noble Pro V3.0
Channels:	18
Transmission Power:	17.84dBm
RC Models:	Car, Boat, Robot
Distance:	>300m (ground)
Channel Resolution:	4096
Battery:	- 1S / (4.2V) x 4300mAh LiPo - 3450mAh 18650 Battery
Low Voltage Warning:	< 3.65V
Antenna Type:	Built-in Single Antenna
Display:	3.5-inch IPS touchscreen, resolution 320x480px
Hardware Interface:	USB/USB-C
Temperature Range:	-10°C to +60°C
Humidity Range:	20% to 95%
Online Update:	Yes
Dimensions:	142.7 x 120 x 232 mm
Weight:	670g

Package Contents:

• FlySky "NB4 Pro+" Transmitter
• Receiver: FGr4B and Cable
• Receiver: FGr8B and Cable
• Hard case including key
• CNC Steering Wheel
• USB-C Cable
• Grip Shell (S, L)
• Spare Throttle Lever
• Manual

Futaba R404SBS (SR/T-FHSS/S.Bus2) Receiver

Futaba R404SBS (SR/T-FHSS/S.Bus2) Receiver

Dimensions	1.00×0.81×0.42 Inch 25.5×20.7×10.6 mm
Weight	5.7 g 0.2 oz
Operating Voltage	DC 3.7V-7.4V

Gens ace Imars Dual Channel AC200W/DC300W Smart Balance RC Charger - Europe White

mars Dual Battery Charger supports 2 channel charging and discharging: DC port power supply supports maximum single port 300W charging, and AC power supply supports intelligent distribution of total power.

The power rate is 200W (2 channels), the maximum charging current is 15A, the charging current is adjustable, and the use and operation are simple; 7 operating modes of the products include charge, discharge, balance, storage, ExtDischarge, SyncCharging, digital power supply;

During the charging process of the product, the current task total voltage, charging/discharging current, working time and other information can be displayed in real time through the display window;

It can also query real-time single-cell voltage information, internal resistance, and temperature, which is convenient for users to understand battery performance and charging status;

The heat dissipation design can effectively ensure the continuous stable and reliable operation of the product.

Features:

• Dual Channel AC/DC Smart Balance Charger - Europe Version.
• Small & Lightweight Portable Design with wide-view IPS Display.
• High power charging, capable of Max15 amp charge rates for one channel, worldwide 100V-240V voltage versatility, AC 200 Watts, DC 600 Watts.
• External discharge function.
• Synchronous output, 2-in-1 Fast-charging.
• Built-in DC power source for different devices.
• Controlled heat dissipation system.
• Temperature compensation function.
• Advanced safety features, UL94-V0 Flame Retardant Grade.
• Protection of Short circuit / Overcurrent / Overcharge / Overvoltage

Specifications:

Input Voltage	AC100-240V DC7-30V
Output Voltage	DC 1~30V
Max Input Current	DC 30A
Max Discharging Power	15W x2(Main port 6W x2, Balance port 9W x2)
Maximum Charging Power	AC 100W x2 DC 300W x2
Charge Current	0.1-15A x2
Discharge Current	0.1~3A x2
Cell Balancing	1~6s
USB Output	5V/2.4A
Display Type	2.4 inch IPS LCD Display
Supported Battery Chemistries	LiPo/LiPo/LIHV/LiFe 1~6S; NiMH/Cd 1~16S
Accessories Included	AC Input Cable / XT60-T adapter / XT60-EC5 adapter / XT60-EC3 adapter
Dimensions	145x76x62mm
Weight	530g

Gens ace Redline V2 Series 5800mAh 7.6V 2S 130C HV LiPo (5mm, 222g)

Gens Ace Redline V2 Series 2S 130C 5800mAh Hardcase LiPo Battery Pack. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 130C 2S 5800mAh 7.6V LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect.

Features:

• Stable automatic stacking technology enables single cell capacities of 5800mAh.
• The most strict single cell capacity, voltage, resistance, discharge curve matching process.
• Superior Japan and Korea Lithium Polymer raw materials.
• Standard ∮5.0mm bullet

Specifications:

Capacity	6000mAh
Voltage	7.6V / 2S1P /
Discharge Rate	130C
Max Burst Discharge Rate	260C
Weight	222g
Size	139mm x 47mm x 18.5mm (L x W x H)
Connector Type	5.0mm bullet

GensAce Redline 2.0 2S HV 7.6V-140C-6500 139x47x22.5mm 265g

Gens Ace Redline 2.0 Series 2S 140C 6500mAh Hardcase LiPo Battery Pack, with a factory installed 5.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 140C 2S 6500mAh 7.6V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect .

 Features:

- Stable automatic stacking technology enables single cell capacities of 6500mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮5.0mm bullet

Specifications:

- Capacity: 6500mAh
- Voltage: 7.6V / 2S1P
- Discharge Rate: 140C
- Weight: 264g
- Size: 139mm x 47mm x 22.5mm (L x W x H)
- Connector Type: 5.0mm bullet

GensAce Redline 2.0 2S HV 7.6V-140C-8500 139x47x25mm 302g

Gens Ace Redline 2.0 Series 2S 140C 8500mAh Hardcase LiPo Battery Pack, with a factory installed 5.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 140C 2S 8500mAh 7.6V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect .

 Features:

- Stable automatic stacking technology enables single cell capacities of 8500mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮5.0mm bullet

Specifications:

- Capacity: 8500mAh
- Voltage: 7.6V / 2S1P
- Discharge Rate: 140C
- Weight: 302g
- Size: 139mm x 47mm x 25mm (L x W x H)
- Connector Type: 5.0mm bullet