Charge Lead 4mm to Futaba Rx Balance - Black. 2S LiPo charge lead with 4mm charger input plug and Futaba Rx output with XH2S balance plug. Extremely versatile, for balancing charging 2S receiver and transmitter packs.

The Iris ONE.05 FWD touring car is based on the ONE.05 touring car, the second generation competition car kit designed and developed entirely by RUDDOG. It features a forward mounted motor and battery for optimised weight balance and performance. The central single belt drive has a machined aluminium pulley and is highly efficient for the low power 17.5T and 21.5T motors. It also has FWD-specific steering geometry to meet the needs of the FWD class, while still sharing the majority of components with the Iris ONE.05 touring car for easy and simple parts management.
It now has an updated and optimised shock linkage and a carbon fibre rocker arm that reduces roll when cornering. New chassis locating pins on the bulkheads, motor mount and damper cases not only improve durability, but have also allowed us to redesign these parts and make them lighter, saving over 25g in total.
Many unique details, such as an optional direct mount aluminium fan, have been incorporated into the design of the Iris ONE.05 to give you an edge over the competition.
FWD features:
·         Forward mounted motor and battery, for perfect weight distribution
·         Aluminium belt pulley
·         Centralised single belt drive
·         FWD-specific adjustable steering system
·         Included front centre steel weights
·         Carbon Chassis
 
New ONE.05 features:
·         Updated shock linkage geometry: for less roll and higher corner speed
·         Chassis pin locators on bulkheads, motor mount and damper housings
·         New lightweight upper and lower bulkheads, motor mount and damper cases
·         Over 25g lighter than the Iris ONE
·         Improved V2 differential and shock seals
·         Reduced chassis front overhang, with carbon front bumper mount
·         Optional redesigned heave shock
 
Legacy features:
·         Unique torsion spring design
·         Single lever rotational shocks
·         Pushrod suspension
·         Double wishbone design; identical arms on all four corners
·         Ultra narrow bulkhead design
·         Steering assembly with easily adjustable Ackermann geometry
·         Adjustable track width with inserts
·         Sturdy and fully adjustable suspension
·         Optional direct-mount aluminium high-speed fan
Due to ongoing R&D, photos may not match the final kit. The shown vehicle is equipped with battery, electronics, wheels, pinion, spur gear and servo arm that are NOT included in the kit.
We recommend follow spur gears (There is no spur gear included in the kit):
IRIS-31000 | Iris Machined Spur Gear 90T 64dp
IRIS-31001 | Iris Machined Spur Gear 100T 64dp
IRIS-31002 | Iris Machined Spur Gear 110T 64dp
Internal Gear Ratio: 1.9
 

The Iris ONE.05 touring car is the second generation competition car kit, designed and developed entirely by RUDDOG. Based on feedback from customers and team drivers, we have improved several areas of the original Iris ONE. While the ONE.05 is still based on the same concept as the ONE and uses most of the same drivetrain and plastic parts, it features several improvements to make the car faster and more durable.
It now has an updated and optimised shock linkage and a carbon fibre rocker arm that reduces roll when cornering. New chassis locating pins on the bulkheads, motor mount and damper cases not only improve durability, but have also allowed us to redesign these parts and make them lighter, saving over 25g in total.
It still features an ultra-narrow bulkhead design and the efficient three-belt design for perfect weight balance and less belt tension compared to a two-belt design.
Many unique details, such as an optional direct mount aluminium fan, have been incorporated into the design of the Iris ONE.05 to give you an edge over the competition.
New features:
·         Updated shock linkage geometry: for less roll and higher corner speed
·         Chassis pin locators on bulkheads, motor mount and damper housings
·         New lightweight upper and lower bulkheads, motor mount and damper cases
·         Over 25g lighter than the Iris ONE
·         Improved V2 differential and shock seals
·         Reduced chassis front overhang, with carbon front bumper mount
·         Redesigned motor mount, for improved spur gear alignment
·         Carbon Chassis
·         Optional redesigned heave shock
 
Legacy features:
·         Unique torsion spring design
·         Single lever rotational shocks
·         Pushrod suspension
·         Double wishbone design; identical arms on all four corners
·         Efficient low friction three-belt drive train
·         Ultra narrow bulkhead design
·         Steering assembly with easily adjustable Ackermann geometry
·         Adjustable track width with inserts
·         Sturdy and fully adjustable suspension
·         Optional direct-mount aluminium high-speed fan
Due to ongoing R&D, photos may not match the final kit. The shown vehicle is equipped with battery, electronics, wheels, pinion, spur gear and servo arm that are NOT included in the kit.
 

Iris | RUDDOG Banner 300x80cm

Iris Race Team Hat

Iris Shim - 3.5x9x0.2mm (4pcs)

ris ONE Wheel Hex Plastic Shim (4pcs)

Iris ONE Wheel Hex 4.0mm (2pcs)

Iris Machined Spur Gear 110T 64dp

Iris ONE.05 Heave Shock Bladder

Iris ONE Servo Horn 25T

Iris ONE Rear Topdeck (Hard | 3.0mm)