1:10 Alu. Standard Dampers 55mm (2)absima

1:10 Alu. Standard Dampers 55mm (2)

Features:
Aluminum body
Total length: approx. 65mm
Mounting length: approx. 55mm
Total diameter: 16mm
Weight/pcs. (filled): 13g
Shock body color: red/copper
Spring color: black
Knurled screw for stepless adjustment
The shock absorbers are delivered oil filled with (100CPS)
  
 
 
Recommended for 1/10 cars like:
Touring (On-road) Cars, Drift Cars, Buggies, Truggies, (Monster) Trucks.
 
Scope of delivery: 
1 pair of shock absorbers

1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR ABSIMA

The success story continues! We have equipped the AMT3.4 "V2" with some new features that bring the vehicle to the next level of evolution.
      
 
Some technical changes have been implemented in our 1/10th scale Monster Truck - among other things, the vehicle now comes with LED lighting on the roof.
 

• NEW* 60A brushless speed controller with T connector and 3421KV motor
• NEW* Programmable speed controller
• NEW* 15 kg steering servo with metal gear
• NEW* LED lighting
• NEW* Monster Truck body with many add-on parts
• NEW* even more option parts available

 

 
 
 
 
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a LiPo 2S/7.4V battery for operation. In addition, a separately available programming box (item 2110062) can be used to adjust various parameters such as braking force, punch, low-voltage protection and more.
 
 
The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 15kg metal gear servo handles the conversion of the steering commands. 
The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving.

4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs.
 
      
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
 
      

• 4WD all wheel drive
• 2.4GHz 4-channel radio system
• 60A brushless speed controller (waterproof; T plug; programmable)
• 3421KV brushless motor (sensorless; splash-proof)
• 15kg metal gear steering servo (25T; ball bearings) 
• 8 Aluminium oil shock absorbers
• Ball bearing main drive
• Extremely durable composite plastic parts
• Steel differential outdrives
• Aluminium main drive shaft with steel mounts
• Adjustable upper tie rods
• 5mm aluminium engine mount
• 6mm shock towers
• 2 differentials (front/rear)
• Stylish Monster Truck body with add-on parts
• "Light-Weight" chassis (less weight - longer driving time)
• Many aluminum option parts available

 

• Scale: 1:10
• Dimensions (L/W/H): 425x300x200 mm
• Weight: 2090g
• Wheelbase: 270mm
• Ground clearance: approx. 45mm
• Track width: 250mm front/rear
• Wheels front/rear: Ø 116mm / Width: 57mm
• Shock absorber oil: 400CPS
• Shock absorber installation length: 100mm
• Motor ratio: 17T / main gear: 64T (module 0.6)  

 
 

• 1/10 Brushless Monster Truck "AMT3.4BLV2" RTR
• 2.4GHz CR4S radio
• Sticker sheet
• Manual

 

• 4 AA batteries for radio
• 7.4V/2S LiPo car battery
• Charger  (suitable for car battery)
• Programming box for individual settings of the speed controller

 
 
 
 

1:10 EP Truggy "AT3.4-V2 KIT" 4WD KIT ABSIMA

The success story continues! We have equipped the AT3.4 "V2" KIT with some new features that take the vehicle to the next evolutionary stage
      
Some technical changes have been made to our 1:10 Truggy - among other things, the vehicle now comes with LED lighting on the roof
 
 
 

• NEW* Body in new race design
• NEW* LED lighting
• NEW* Downforce rear wing
• NEW* even more tuning parts available

 
 
The KIT version is a kit that can be assembled with standard tools such as pliers and screwdrivers. Shock absorbers and gearbox units are already pre-assembled so that even children can build this vehicle under parental supervision. You can also decide for yourself which electronic components should be installed in the vehicle. The kit includes 2 gear units - a copper/plastic version with the gear ratio for brushed motors and a full metal version designed for a brushless drive. This means that there are no limits to the motorization.
 
   

• 4WD all-wheel drive
• 4 oil shock absorbers
• Ball bearing main drive
• Extremely durable composite plastic parts
• Steel differential outlets
• Aluminum main drive shaft with steel mounts
• Adjustable upper tie rods
• 5mm aluminum motor mount
• 6mm shock towers
• 2 differentials (front/rear)
• Stylish Truggy body with add-on parts
• "Light-Weight" chassis (less weight - longer driving time)
• Many aluminum tuning parts available

 

• Scale 1:10
• Dimensions (L/W/H): 405x325x165 mm
• Weight: 1180g
• Wheelbase: 270mm
• Ground clearance: approx. 35mm
• Track width: 270mm front/rear
• Wheels: Ø 105mm / width: 55mm
• Shock absorber oil: 400CPS
• Installation length of the shock absorbers: 90mm
• Gear ratio BRUSHED version: pinion: 18T / main gear: 64T (module 0.6)
• Gear ratio BRUSHLESS version: pinion: 23T / main gear: 64T (module 0.6)   

 

• 1/10 Truggy "AT3.4V2" KIT version
• Sticker sheet
• Manual

 

• Radio and receiver
• Speed controller and motor (brushed or brushless)
• Steering servo with 25T
• Drive battery (7.2V NiMH or 7.4V/2S LiPo battery)
• Charger (suitable for the drive battery)
• Programming card (optional for individual settings of the speed controller)
• 4* AA batteries for the remote control

1:10 EP Truggy "AT3.4-V2" 4WD RTR ABSIMA

• NEW* 80A brushed speed controller withT-connector and 540 motor
• NEW* Programmable speed controller
• NEW* 15kg steering servo with metal gears
• NEW* LED lighting
• NEW* Race body with many add-on parts
• NEW* even more option parts available

 
 
 
 
The new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.
 
      

The car is powered by a 540size 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity.
 
4 oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 15kg metal gear servo with takes over the implementation of the steering commands.
 
      
 
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
 
      

• 4WD all wheel drive
• 2.4 GHz 4-channel radio system
• 80A brushed speed controller with T-plug
• 540size 15T motor with 32.000RPM @ 7.4V
• 15kg MG steering servo (25T, ball bearings)
• Oil shock absorbers
• Ball bearing main drive
• Extremely durable composite plastic parts
• Steel differential outputs
• Aluminum main drive shaft with steel mounts
• Adjustable upper tie rods
• 5mm aluminum motor mount
• 6mm shock towers
• 2 differentials (front/rear)
• Stylish truggy body with add-on parts
• "Light-Weight" chassis (less weight - longer drive time)
• Many aluminum option parts available

 

• Scale: 1:10
• Dimensions (L/W/H): 405x325x165 mm
• Weight: 1740g
• Wheelbase: 270mm
• Ground clearance: ca. 35mm
• Track width: 270mm front/rear
• Wheels front/rear: Ø 105mm / Width: 55mm
• Shock absorber oil: 400CPS
• Shock absorber installation length: 90mm
• Motor ratio: pinion: 18T / main gear: 64T (module 0,6) 

 
 

• 1/10 Truggy "AT3.4V2" RTR
• 2.4GHz "CR4S" radio
• Sticker sheet
• Manual

 

• 4x AA Batteries for radio
• 7.2V NiMH or  7.4V* LiPo car battery (*recommended)
• Charger  (suitable for car battery)
• Programm card for individual settings of the speed controller

 
 
 
 
 

1:10 EP Truggy "AT3.4KIT" 4WD KIT

HIGHLIGHTS

• KIT Version for self assembling
• Racing Body Design
• Including 2 Versions of Motor Transmissions for Brushed & Brushless (Steel Version)
• NOTE: KIT Version don`t includes any electronic components!
• 
  PRODUCT FEATURES    
• Ball bearing transmission
• Oil filled adjustable shocks
• Gear differential front/rear
• Aluminum motor mount
• Complete covered transmission
• Adjustable turnbuckles & wishbones
• Motor heat sink
• Aero disc racing wheels
• Full printed body
• Sticker sheet for a unique design
• Performance hop ups available!
• TECH SPECS
• Drive System: 4 Wheel Drive
• Wheelbase: 270mm
• Ground Clearance: 40mm
• Measure (L/W/H): 405x325x165 mm
• Weight: 1375g
• Tire width: 55 mm front / 55 mm rear
• Tire Ø ± 105 mm
• Shock spring force: medium / Length: 85mm f/r
• Differential oil viscosity: 3.000 front /1.000 rear
• Shock oil viscosity: 400 f/r
• Motor transmission: Pinion 23T / Gear 64T
• Pinion module: 0.6
•  
  SCOPE OF DELIVERY
• Truggy "AT3.4" KIT version
• Manual
• Sticker Sheet
•  
  REQUIRED ACCESSORIES
• Radio System
• Steering Servo + Servo Horn
• Electric Speed Controller (brushed or brushless)
• 540size Electric Motor (brushed or brushless)
• Battery - Racing Pack NiMH or LiPo (up to 30C)
• Charger
• 4x AA Mignon Batteries for Radio
•  

1:10 Off-Road 4WD racing front rims 14mm white (2)

After a long time testing through our time drivers, finally ABSIMA is proud to present our 1:10 Aero Disc Competition Wheels!

Specially deisgned for competiton racing and made from the finest durable material we offer 4 different colors for everyone!

• 14mm Hex
• "Pro Flex" Material
• Ø 62 mm
• Width: 27mm
• Weight: 13g
• Application: 4WD front

Offset for Schumacher, Kyosho, TAE and Yokomo. For Team C cars a +1.75 hex offset is needed. For Xray the 14mm Xray hex +1,5mm is needed.

1:10 Screw set ABSIMA

• 10 x Set screw M3*3
• 10 x Set screw M3*10
• 10 x Countersunk screw M3*8
• 10 x Countersunk screw M3*10
• 10 x Countersunk screw M3*16
• 10 x Roundhead screw M3*8
• 10 x Roundhead screw M3*10
• 10 x Roundhead screw M3*12
• 10 x Roundhead screw M3*16
• 10 x Nuts M3  

1:16 EP BL Touring Car "FUN MAKER" neon genesis RTR ABSIMA

Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!
This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired!
 
The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience.
 
Short and sweet: This little powerhouse lies on the road like a board !
 
HIGHLIGHTS:

• Aluminum chassis for excellent handling characteristics
• Powered by a powerful 380 brushless motor
• High performance differentials on front and rear axle
• Independent suspension for exceptional handling
• Intricately designed, multi-piece bodyshell
• Speed: +/- 40 km/h

DESIGN:
 
The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.
     
     
 
CHASSIS PERFORMANCE:
 
Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!
Basically, the structure and arrangement of the components is like a 1:10 competition touring car:

• Independent suspension
• CVD front driveshafts
• Differentials with aluminum pinion gears (38Z) and pinion gears (14Z)
• Differential gears made of polyamide (12Z/24Z)
• Aluminum drive bones on rear axle
• Aluminum "big-bore" shock absorbers

Chassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item 1610092/1610093).
     
         
 
DRIVE UNIT:
 
a plenty of power for that scale!
Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger included
 
 
 

 
REMOTE CONTROL & STEERING:
 
A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface! 
      
 
FEATURES:

• 4WD All Wheel Drive
• 2.4GHz remote control
• Full ball bearing drive
• Aluminum chassis, upper deck and shock towers
• Aluminum "big bore" shock absorbers
• CVD axles on front axle
• Heavy duty front & rear differentials
• Aluminum propshaft
• LED lighting front & rear
• Extremely detailed body with sticker sheet

SPECIFICATION:

• Scale: 1:16
• Dimensions: (L/W/H): 310x140x80mm)
• Weight (without battery): 560gr
• Wheelbase: 175mm
• Ground clearance: approx. 6mm
• Track width: 110mm front / 115mm rear
• Wheels front/rear: Ø 50mm / Width: 18mm
• Damper filled: Yes (100CPS)
• Damper installation length: 38mm
• Motor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!)

INCLUDED:

• 1:16 Touring Car RTR
• 2.4GHz remote control
• 1500mAh LiPo battery
• 800mAh LiPo fast charger
• Sticker sheet
• Manual

      
REQUIRED ACCESSORIES:

• 2* AA batteries for remote control

1:8 Buggy disc rims white (2)

1:8 Buggy disc rims white (2)

 Hex hub: 17mm
√ Ø: 84mm
√ Width: 40mm
● 2pcs./set

10 EP Buggy "AB3.4-V2" 4WD RTR absima

• NEW* 80A brushed speed controller withT-connector and 540 motor
• NEW* Programmable speed controller
• NEW* 6kg steering servo
• NEW* LED lighting
• NEW* Downforce rear wing
• NEW* even more option parts available

1230290 Drive Shafts Buggy f/r (2)

1230290 Drive Shafts Buggy f/r (2)

2.4GHz 6-Channel Radio "CR6S" including Receiver with Mixed Mode for RC Cars, Boats and Tanks

FEATURES:

SPECIFICATION:

• Channel: 6CH
• Radio size (L/W/H): 160x100x200mm
• Water-proof receiver
• Receiver size (L/W/H): 35x20x13mm
• Radio operating current: 80-120mA
• Receiver operating current: 30mA
• Radio voltage range: 4.8-12V (LiPo suitable)
• Receiver voltage range: 3.3-10V
• Stable distance control up to 200m

SCOPE OF DELIVERY:

• CR6S 6-Channel Radio
• R6WP 6-Channel Receiver
• Manual (DE/EN/FR)