Intellect MC4 6000mAh 130C 7.6V High Power Graphene Shorty Pack LiHV
Extreme punch and race winning power for 1/10 offroad and touring cars
With the new 2026 specification of the MC4 series, Intellect pushes shorty race packs to the next level. The BT2S6000MC4 High Power shorty is designed for drivers who want maximum power delivery, extremely strong punch and a very stable voltage curve in a compact 2S format.
With a capacity of 6000mAh this LiHV shorty pack provides long runtime and very strong acceleration. The 130C discharge rating offers massive current reserves for both stock and modified classes, giving instant throttle response out of every corner while keeping the voltage high throughout the whole run.
Thanks to state of the art silicon graphene cell technology, the pack features extremely low internal resistance, reduced heat build up and excellent cycle life. As a LiHV pack it can be charged up to 4.35V per cell at a nominal voltage of 7.6 V, resulting in a very strong initial performance and consistent power delivery to the finish line.
Main features
- High capacity: 6000mAh for long runtime in 1/10 race cars.
- High Voltage (LiHV): Charge end voltage up to 4.35V per cell for increased RPM and torque.
- Silicon graphene technology: Updated 2026 spec chemistry with very low internal resistance and improved temperature behavior.
- 130C discharge rate: Provides extreme current delivery and maximum punch on throttle.
- Shorty High Power design: Increased height for maximum energy content and strong power delivery.
- 5mm tubes: Robust high current 5mm gold plated tubes for low loss power transfer.
- Race legal: Approved for EFRA, BRCA, ROAR and IFMAR competition.
Technical data
| Manufacturer / model |
Intellect MC4 LiHV 2026 Spec BT2S6000MC4 |
| Type |
LiPo / LiHV (High Voltage) |
| Configuration |
2S1P (2 cells) |
| Capacity |
6000 mAh |
| Nominal voltage |
7.6 V |
| Discharge rate |
130C |
| Dimensions (L x W x H) |
96 x 47 x 25.1 mm |
| Connector |
5mm tubes |
| Weight |
217 g |
| Cell technology |
Silicon graphene |
| Application |
1/10 offroad and touring competition (shorty high power) |
| Approvals |
EFRA, BRCA, ROAR, IFMAR |
Charging and storage information
Never store the pack fully charged or fully discharged. For best service life we recommend a storage voltage of about 3.80V to 3.85V per cell. Avoid heat and direct sunlight during storage. A cool, dry place is ideal. A hot car trunk is not a suitable place to store LiPo packs.
For maximum life we recommend charging at 1C. Higher charge currents can noticeably reduce the life and performance of the cells and may worsen cell balance over time.
Safety note: Always use a suitable LiPo safety bag while charging, for example the RUDDOG HD LiPo Charging Bag (180x80x80mm).
Installation recommendations
Make sure the pack does not sit directly against hot components such as the motor to avoid unnecessary heat transfer. To keep motor and pack cool we recommend using an additional fan, for example:
If the connectors show heavy wear, we recommend replacing the plugs on the speed controller in time to avoid unnecessary resistance. Matching replacement connectors can be found in the RUDDOG Distribution product range.
Warranty
All packs are covered by the statutory warranty period. Please note that improper use, wrong storage or mechanical damage can lead to loss of warranty claims.
