MARCO'S MODEL CARS LAADKABEL VAN XT60 NAAR TRAXXAS.

The Raytronic C30 + 300W was designed to offer an intelligent pocket charger with high performance and very simple operation. RAYTRONIC C30 + allows charging and discharging common types of cells (NiCd, NiMH, LiPo, LiHV Li-ion, LiFe, Pb), in addition it is equipped with a built-in six-channel balancer, which ensures safe and comfortable charging of lithium batteries. Measurement of voltage and internal resistance of individual cells (for lithium batteries) is a matter of course.

Features:

• Input supply voltage 10 - 26 V DC (socket XT60)
• For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
• Adjustable charging current (0.1 A - 12.0 A)
• Adjustable discharge current (0.1 A - 3.0 A)
• Max. power for charging 300 W, for discharging 5 W
• Termination of charging using delta-peak automation for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current / constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable end voltage for charging and discharging for lithium batteries
• Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
• Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
• Stop charging when the set time or the supplied charge is exceeded.
• Memory for 5 charging / discharging programs.
• Measurement of the total voltage of the set and individual cells (for lithium batteries)
• Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
• The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector)
• Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
• A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
• Reverse polarity and short circuit protection at the output / li>
• Compact plastic case, small dimensions
• Built-in fan for forced cooling

Specifications:

Small two-channel charger Raytronic C50 2×250W was designed with an effort to offer a smart charger with high power and simple and intuitive operation. Raytronic C50 allows to charge and discharge common types of batteries (NiCD, NiMH, LiPo, LiFe, LiHV, Li-Ion, Pb), and is also equipped with 6-channel balancers, which provide safe charging of lithium batteries. The charger has a coloured LCD display and programming button and vial, which will provide you with the possibility of comfortable and very clear parameter settings, control, and watching charging/discharging progress.

Besides compact "handful" dimensions and intuitive controls, the following is worth mentioning:

• Program for new types of "High voltage" lithium (LiHV) batteries with an output charging voltage up to 4,25V
• Powerful balancer with current up to 800 mA
• Optional synchronised operation of both channeůs for charging a single battery with power up to 500 W
• Optional recuperative discharging with high power when charging from a car battery (energy consumed by your charger is used to charge the car battery powering the charger again
• Adjustable output voltage for charging and discharging lithium batteries (allows more gentle charging, as liked by pilots, or, conversely, brutal discharging loved by RC car enthusiasts).
• Programs for charging intelligent batteries for popular DJI drones.

Features:

• Input: 7.28V DC (XT60 connector)
• For charging/discharging 1–16cell NiCd/NiMH, 1–6cell Li-Ion/LiPo/LiFe/LiHV or 2–20V Pb batteries
• Adjustable charging current (0.1–15.0 A) for each channel
• Adjustable discharging current (0.1–3.0 A), or recuperative discharging (0.1–15.0 A) for each channel
• Charging power output up to 2x250W/1x500W for synchronous charging
• Discharging power output up to 2x12W, up to 2x250W for recuperative discharging
• Charging finishing via automatic "Delta-Peak" for NiCd and NiMH batteries
• Lithium and Pb batteries are charged via the "constant current/constant voltage" method
• Adjustable sensitivity of "Delta-Peak" detection for NiCd/NiMH batteries
• Adjustable output voltage for charging and discharging the lithium batteries
• Repeated cyclic charging/discharging or discharging/charging operation for NiCd and NiMH batteries, up to 12 cycles
• 3 lithium battery modes - charging, discharging and charging/discharging for storing. All of this with a balancer or without it.
• Finishing of charging after reaching a set time, temperature or supplied charge
• Memory for any amount of charging/discharging programs
• Internal resistance measuring of individual cells
• Stabilised DC current source (0.1–15.0 A) with an adjustable voltage limit
• Charging programs for intelligent DJI Mavic/Phantom/Inspire batteries
• Ports for temperature sensor (sold separately)
• USB input (5V/2.1A) for smartphone/tablets/etc. charging
• Simple firmware update via USB port
• Backlit coloured LCD display with simple and well-arranged menu, parameter overview during charging/discharging
• Programming button and vial for simple and intuitive setting and controlling the charger
• Warning messages for higher safety - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity etc...
• Incorrect polarity and on-input short-circuit protection
• Forced-cooling fan
• Compact plastic body, very small dimensions

Charger's both channels are equipped with an output XT60 ports and universal ports for service connectors JST-XH, allowing direct connection of battery power cables and service connectors JST-XH for 2–6S packs. If you are using a pack with XT60 and JST-XH connects, you don't need any additional adaptors and cables. To connect service connectors of other systems you can use standard Sky RC or RC System adaptors.

Note: charger uses output voltage of 2.4V/cell for Pb battery charging - for this reason, it is suitable for charging typical lead-acid batteries (car batteries) and gel batteries with reversible valve. NOT SUITABLE for charging gas-tight gel batteries charged with a maximum of 2.3V/cell.

Specifications:

Powerful stabilised switched-mode power supply Raytronic P20 with adjustable output voltage and current limit is perfect for powering modeller's chargers with power up to 300W and other electronic devices. It is suitable for testing electronic devices that have to be powered by 6–15V DC.

The power supply is equipped with protection circuits that protect it from short-circuit on input or from overloading. There is an active cooling system, which stabilises operating conditions and protects from overheating.

Output voltage and current limit are adjusted via knobs on the front panel - values of output voltage or current are shown on 3-digit LED display (choose between current and voltage via switch).

Thanks to an adjustable output voltage and current limit you can use the power source as a charger for batteries that need constant voltage/constant current charging mode (such as acid-lead or Li-Fe batteries, other than A123® with different chemicals and charging behaviour. Common modeller's chargers specialized for A123® cells can end the charging too soon (or completely ignore the cells) etc.
 

Specifications:

Includes:

• Raytronic P20 power supply
• Power cable
• User manual

Product information "Robitronic Expert LD 100 Charger LiPo 2-4s 10A 100W"

The Expert LD 100 Charger is a multi-function charger/discharger that allows you to use the most popular battery types such as LiPo/LiHV/Lilon/LiFe/NiCd/NiMH/Pb.
With a remarkable 100 watts of charging power and a maximum of  10A charging current, the Expert LD 100 charger offers more than sufficient charging power for most applications in a compact design.

On the front there is a built-in XT60 plug where you can easily connect your battery or charging cable reverse polarity protected.
Information about settings and running process can be obtained via the backlit LCD display.
The Expert LD 100 is the perfect multifunction charger and the right choice for most modeller.

Features:

• Compact design
• 100 watts charging power, max. 10A charging current
• Suitable for: LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb
• Easy handling and navigation with four buttons
• Informative LCD display with backlight
• Built-in XT60 connector on the front panel
• 5 batteries profile memory
• Integrated balancer with max. 300mA current
• Various security settings (delta peak sensitivity, auto charge current limit, capacity limit, temperature limit, process time limit, automatic fan)

Technical Specifications:

Delivery:

1x Expert LD 100 charger
1x Power cord
1x Charging cable Tamiya-connector
1x Charging cable T-connector
1x Manual

Optional Accessories:

SkyRC Temperature Sensor (SK600040)

Product information "Robitronic Expert LD 20 Charger NiMh 4-8 cells 2A"

Delta Peak charger for 4-8cell NiMH and NiCd batteries with a capacity from 2000mAh up to 6000mAh. The charging time for a 3000mAh batterie is around 90 minutes.

Technical Specifications

RUDDOG 2S Charging Lead 60cm (4/5mm,2mm)(7PIN-XH,XT60)

SkyRC 12-18v Efuel 30a Power Supply, Sk-200013-04

SkyRC 380w Power Supply, Sk-200023-05

SkyRC B6 Lite Multi Chemistry Charger/d Ischarger, Sk-100151-01