info

Je hebt het minimaal aantal bereikt

Winkelwagen (0)

Er zijn nog geen producten in uw winkelwagen geplaatst.

Laders

Weergave:


Bezig met laden...
ABSIMA Charger

Snel bekijken

(0)
Op voorraad
ABSIMA Charger

ABSIMA Charger "CUBE 2.0" NiMH/LiPo - 4000033

(0)
€ 32,95

FEATURES:
 
A "easy-to-use" charger which is especially suitable for beginners. The uncomplicated setting options make it easy to operate and it`s suitable for LiPo/LiFe and NiMH/NiCd batteries.
The unit features a selectable charging rate, delta-peak sensitive cut-off and cell balancing of LiPo/LiFe batteries.
AC power cable available with Euro pin plug (4000033) and UK plug (4000033UK)
 
SPECIFICATION:
  • Input voltage: 100-240V AC
  • Charging current: 1.0A / 3.0A / 5.0A (50W)
  • Charging output: 4mm sockets
  • LED for battery type identification and status
  • LiPo/LiFe batteries: 2-3S
  • NiMH/NiCd: 1-8 cells
  • Balancing current: 350mAh
  • Delta-peak sensitive
  • Internal power suply
  • Dimmension: 110x109x49 mm
  • Weight: 490 g
   
SCOPE OF DELIVERY:
  • Cube 2.0 Charger
  • AC power cable
  • LiPo/LiFe balancing board
  • Charging cable with T-plug
  • Charging cable with Tamiya plug
  • Manual

Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

Snel bekijken

(0)
Niet op voorraad
Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

(0)
€ 355,00

Maximum Charge Power 1400W at >26V (1000W max. per channel)
Charge Current Range 5mA - 40A per channel (up to 70A in synchronous mode)
Discharge Current Range 5mA - 40A per channel (up to 70A in synchronous mode)
Input Voltage 10 - 30V DC
Input Current 60A (47A single channel maximum)
Maximum Discharge 80W per channel (up to 140W in synchronous mode)
Maximum Regenerative Discharge 1000W per channel (up to 1400W in synchronous mode)
Maximum External Discharge 1000W per channel (up to 2000W in synchronous mode)
Current Drain For Balancing 1.2A per channel (up to 2.4A in synchronous mode)
Balance Accuracy 10mV
LiPo/LiIo/LiFe 1 - 6 series
NiCd/NiMh Cell Count 1 - 25 series
Pb Battery Cell Count 1 - 18 series
Battery Setup Memories 64 user presets
Intelligent Temperature Control Yes
USB Charging Port 5V , 1A (1.2A current limiting protection)
PC Connectivity Mini USB 2.0
Dimensions 171x118x59mm
Weight 910g

SkyRC BD250 Battery Discharger/Analyzer - 600123-01

Snel bekijken

(0)
Niet op voorraad
SkyRC BD250 Battery Discharger/Analyzer - 600123-01

SkyRC BD250 Battery Discharger/Analyzer - 600123-01

(0)
€ 89,95

SIMPLE, ROBUST AND POWERFUL

Upgraded from BD200, BD250 is not only a powerful discharging device but also a precise measurement tool for battery capacity. It takes the guesswork out of choosing the good-performance battery for your application. BD250 offers a maximum of 250 Watts/35 Amps to discharge your battery and will test virtually any battery type or size, any chemistry cells. It's stylish but small with a high-performance cooling system and uses MOSFETS from the well-known IXYS, to make sure it can discharge at 250 watts continuously.

Specifications

The BD250 is a powerful discharging device that allows the user to discharge a battery at up to 35 amps or 250 watts and also measures and compares the performance of batteries. BD250 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application.
Size and Weight
Dimension: 136.6x104.8x107mm
Weight: 879g
Power
Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V
High Voltage Alert: >35V Max.
Discharge Power: 250W
Discharge
Discharge Current Range: 0.01A-35.00A
Discharge Power: 250W
Display
Current Consumption in Sleep Mode: <100uA
Capacity Display Accuracy: ±3%

Current Display Accuracy:
0.01-10.00A ±60mA
10.00-35.00A ±3%
Voltage Display Accuracy:
5.4-10V <80mV
10-20V <120mV
20-35V <160mV

SKYRC D260 AC/ DC Dual Balance Charger/ Discharger - 100157

Snel bekijken

(0)
Extra levertijd
SKYRC D260 AC/ DC Dual Balance Charger/ Discharger - 100157

SKYRC D260 AC/ DC Dual Balance Charger/ Discharger - 100157

(0)
€ 139,95

SKYRC D260 AC/ DC Dual Balance Charger/ Discharger

SkyRC DB200 Battery Discharger & Analyzer - 600123-01

Snel bekijken

(0)
Op voorraad
SkyRC DB200 Battery Discharger & Analyzer - 600123-01

SkyRC DB200 Battery Discharger & Analyzer - 600123-01

(0)
€ 79,95

SkyRC DB200 Battery Discharger & Analyzer

Battery Discharger & Analyzer

  • It displays real time battery voltage, discharged capacity and discharge current.
  • It can test battery capacity that helps select batteries with desired capacity.
  • It saves time when user wishes to store their large capacity batteries.
  • It helps activate the best performance of your batteries for competition.

Powerful, Robust, Simple
The BD200 is a powerful discharging device that allows the user to discharge a battery at up to 30 amps or 200 watts and also measures and compares the performance of batteries. BD200 allows for the precise measurement of battery capacity and takes the guesswork out of choosing the best battery for your application. The BD200 is much more than a simple battery discharger or a battery load tester. It will test virtually any type or size of battery, any chemistry or number of cells, up to 35 volts. It is small with a high performance cooling system and uses MOS fets from the well-known brand IXYS, to make sure it can discharge at 200 watts continuously.

Big Breakthrough Fan System
A single, larger fan that push air downward through an extruded aluminum heat sink. As air passes vertically through the heat sink, it absorbs heat and carries it out. This make BD200 discharge rate at 200 watts continuous possible.

It can test virtually any type, size and chemistry battery
BD200 is a voltage oriented discharger, virtually any type of battery can be operated. Accepted voltage ranges from 5.40V to 35.00V.

Easy-to-Use PC Software for Data Analysis
PC software supplied with the BD200 is easy to use, intuitive. There are two discharge mode: 1. Constant Power; 2. Constant Current. The software can automatic sensing of battery cell count and recommends a minimum safe discharge voltage. Discharge tests may be viewed in Amp Hours, Watt Hours or Minutes. Results can be graphed as Voltage vs. Amp hours, Watt hours, Minutes.

  PC Software for Data Analysis

SKYRC DC Power Distributor (Banana connector) - 600114-01

Snel bekijken

(0)
Extra levertijd
SKYRC DC Power Distributor (Banana connector) - 600114-01

SKYRC DC Power Distributor (Banana connector) - 600114-01

(0)
€ 15,95

SKYRC DC Power Distributor (Banana connector)

SKYRC S65 AC 65W Charger/Discharger - 100152-04

Snel bekijken

(0)
Op voorraad
SKYRC S65 AC 65W Charger/Discharger - 100152-04

SKYRC S65 AC 65W Charger/Discharger - 100152-04

(0)
€ 44,95


SkyRC S65 AC Professional Charger/Discharger stands out for its angular design and compact size by packing a big power of 65 watts into such a small case. Compatible with a full range of the most popular battery types, including the new generation LiHV, the S65 keeps your batteries powered up with 6-amps of charging power.

AGM & Cold Charge Modes for PB Battery
SkyRC S65 can charge AGM battery and also can be used for charging PB battery at very low temperatures.

Embedded XT60 Battery Connector
By embedding the XT60 battery connector in the charger, it gets more convenient & safe for charging the most popular battery with XT60 connector and avoid the possibilities of reverse polarity for it.

Smart & Efficient Cooling System
Temperature controlled 7000rpm high speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device.

Higher Accuracy with Three Decimals for Battery Voltage
The charger firmware is highly optimized by displaying the battery voltage with three decimals during the process of charging & battery voltage measuring.

SPECIFICATION

LiFe/ Lilon/ LiPo/ LiHV/ NiMH/ NiCd/ PB batteries. For Pb battery, AGM Charge and Cold Charge mode are available.
Input voltage: AC 100-240V
Circuit Power: Max Charge: 65W
Max Discharge: 10W
Charge Current Range: 0.1-6A
Disharge Current Range: 0.1-2A
Current Drain for Balancing Port:Max 200mA
Trickle Charge Current: NiMH/ NiCd 50-300mA & OFF
LiPo/LiFe/LiIon/ LiHV Cells: 2-4S
MiMH/ NiCd Cells: 6-8S
Pb Cells: 6-12V
Firmware Upgrade: NO

SKYRC T100 Charger - 100162

Snel bekijken

(0)
Extra levertijd
SKYRC T100 Charger - 100162

SKYRC T100 Charger - 100162

(0)
€ 59,95

SKYRC T100 Charger

YellowRC DIGI CHARGE - YEL4105

Snel bekijken

(0)
Op voorraad
YellowRC DIGI CHARGE - YEL4105

YellowRC DIGI CHARGE - YEL4105

(0)
€ 59,95

This professional digital charger is the perfect charger for all battery types available. The display gives you all the required data from your packs and is easy to use. 

Specs YEL4105:

AC Fast charger
Charge current 0.1-6.0A
NIMH/NICAD 6-8 Cells
LiPo  (2-4 Cells)
Pb 6-12V
Integrated Balancer
Multiple connectors included
Easy to use interface
Input voltage AC: 100-240V
Discharge Function

YellowRC DUO CHARGE - YEL4106

Snel bekijken

(0)
Extra levertijd
YellowRC DUO CHARGE - YEL4106

YellowRC DUO CHARGE - YEL4106

(0)
€ 119,95

This professional digital dual charger is the perfect charger for all battery types available. Save time with charging 2 packs at the same time. The display gives you all the required data from your packs and is easy to use.

Specs YEL4106:

AC/DC Fast charger 100W
Charge current 0.1-10.0A
NIMH/NICAD 1-15 Cells
LiPo  (1-6 Cells)
Pb 2-20V
Integrated Balancer
Multiple connectors included
Easy to use interface
Input voltage AC: 100-240V
DC Power supply 100W @ 13.8v
Discharge Function
Dual Charge
Scan to go
Voice Guide
Bluetooth


Deze website gebruikt cookies om het bezoek te meten, we slaan geen persoonlijke gegevens op.